do you have all forward gears? if yes, you have broken reverse gear (one turning the spin into reverse) in the transmission, if you miss also some forward gears it shifts rough, tranny is to be rebuilt... either way it's expensive fix
Cranckshaft position sensor needs replaced!
specify "not go into drive" does that mean it stalls or?
2001 vw beetle will not go into reverse
Shift linkages not put in the correct spots.
Automatic or manual trans? What am I missing here? Explain! If it is stuck in 3rd gear then it is obvious that it can't go in reverse.
I put into drive or try reverse and theshifter won't go into gear.
Manual transmission only: Probably broke your reverse gear or grind up the gear to much and it won't go into gear. Could need a new clutch or thrust bearing does it crunch trying to get it into gear if yes then its probably the clutch
There can be several things that will cause your transmission not go into reverse. The most common cause is the gear in the transmission is worn.
Yes, You just have to select reverse gear before letting go the clutch.
If a 2001 Honda Civic will not go into gear, the problem is probably the transmission. Otherwise, it may be the shift mechanism that is the cause.
Put it in first gear, then twist the reverse knob and click it down another geer while you are still holding the knob. Let go of the knob and it should go in reverse. Some models have a little lever instead of this. If the TRX is older than 2005, then it has no reverse gear.
Put it in first gear, then twist the reverse knob and click it down another geer while you are still holding the knob. Let go of the knob and it should go in reverse. Some models have a little lever instead of this. If the TRX is older than 2005, then it has no reverse gear.