it is up on the timing chain cover on right side of engine. While sitting in the driver seat. Driver side is left other side is right. good luck NEUTZ I told you wrong, The cam senser is the distributor itself. SORRY, NEUTZ
No cam sensor. Just a crank sensor on the bottom of the timing cover
It's located in the distributor under the rotor.
position cam sensor 3.9 licon ls
where is the cam shaft position sensor on a 98 ford explorer 4x4 4.0 sohc 4x4
the camshaft position sensor is used to synchronize the fuel injection system with the opening of the intake valves. It synchs the cam shaft location with the crankshaft location It can be in a distributor or it can read a tone wheel on the cam shaft.
The Cam Sensor in a 1996 GMC Sonoma is located in the distributor under the rotor cap
where is the cam sensor located on a 2001 silverado ?
I have a 98 Suburban with the 5.7 vortec V8. The cam sensor is in the distributor. Remove the cap and rotor to get to the sensor. Hope this helps.
what is location of cam positioning sensor on 2005 scion xb
Cam position is taken from the distributor, there is no external cam sensor.
The cam position sensor signals the fuel injectors to inject. The crankshaft position sensor signals the spark plugs to fire.
The cam position sensor on a 1999 Escalade is situated directly over the crankshaft pulley. The 1999- 2000 Cadillac Escalade was the first generation of this car model manufactured by General Motors.
Cam position is taken from the distributor on this vehicle, there is no separate cam sensor.
Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.
CMP= Cam Shaft Position Sensor.
where is the location of 98 Kia Sportage 4x4 2.0 liter cam sensor?
It is mounted inside of the distributor under the rotor button.
The cam sensor is inside the distributor.The cam sensor is inside the distributor.
The 94 and 95 are the same,no cam sensor.1996 and 1997 are differant in one way.The 1996 and 1997 have a cam sensor. .The 97 has a cam sensor and the 94 does not.The 1996 has a cam sensor too.
the cam sensor is locate at the front of the engine.
It tells the computer the location of the camshaft as it spins. This info is used for fuel and ignition timing.
The cam position sensor is attached to the distributor, under the distributor cap. It is held in place with two screws.
cam sensor senses position of cam .coil sensor operates coilboth 2 entirely different parts of engine
I would like to know where the cam sensor is on a 1999 pathfinder and is there one or they calling it a crank shaft sensor The cam shaft position sensor is located in the distributor.
The cam sensor is under the front of the passenger side cylinder head