Value is too difficult to be accurate without seeing the gun. Condition which includes the amount of original finish and original configuration will determine value. Auto 5's with recoil pads (other than Mag 12's) poly-chokes and compensators will reduce value. Recommend taking it to a gun shop for appraisal.
No way to answer without knowing how old the shotgun is, what the 00 buck is made of and the choke of the piece.
In the UK a women with a 26inch waist is a size 8 !.. 25 1/2 inch waist is a 6..
Inch and foot are both unit of distance. As 1inch=0.0833333 foot. Therefore, 26inch=26*0.0833333=2.16667 feet.
serial number is incomplete. add the letter above or preceding 20023
It was manufactured by J Stevens between 1920 and 1948. There should also be a model number on the right side - probably 5000, 5100, or 311. Value will be $150 to $250, depending on condition.
I'm afraid that size is to big for UK. Go shop at USA tyvm.
yes im that age and weigh that much and im absolutely normal
No. 700C translates to a Bead Seat Diameter(where the tire contacts the rim) of 622 mm, and the most common 26 inch is 559 mm - there's no way you can make them fit reliably.
As long as the television is an HD model, simply deliver a 720p signal to the television and you will have 720p content being displayed. The television will accept SD, 720 and 1080 without any adjustment needed.
The hub is the center part of the wheel that holds the wheel axle and the spokes together. The hub off of a BMX cannot go on a 26 inch Jumper dirt bike, it will not fit.
Many of the well known brands such as Samsung, Panasonic, and Sony carry the 26inch in their range. Lesser know brands such as Insignia also carry it in their range. With the advent of LED TVs, the price of LCD TVs has dropped, making the 26 inch LCD TV not overly popular when compared to the larger sizes.
Find the cubic inches then divide by the value 12x12x12=1728. If 26 is the diameter then 3.14x13x13x24=12735.84 12735.84/1728=7.37 approximately. If 18 is the diameter then 3.14x9x9x24=6104.16 6104.16/1728=3.5325 approximately.
Seamless steel pipes are made by heating solid ingot and pushing a piercing rod to form a hollow tube. Finishing of seamless steel could be done through techniques such as hot rolled, cold drawn, turned, roto-rolled etc. After going through the finishing process, all pipes are then pressure tested on a machine. The pipes are being stenciled after being weighed and measured. External coating can then be applied for use in the applications for aircraft, missiles, anti-friction bearing, ordnance, etc. The wall thickness for seamless steel pipes range from 1/8 to 26inch outside diameter. for more infomation,http://www.hnssd.com/news.asp?type=1&id=128
There are many determining factors to consider when assigning a value to a rifle of this age and high collector desirability.I would like to start with the fact that you have a Winchester model 1876 second model,lever action rifle that was made in the year 1881.This is determined by your serial number provided.What I do not know by your question is what barrel length you have?Does it have a .22 inch round barrel(Carbine model 1876.)or do you have a different barrel length,26inch,or 28inch barrel in either round or octagon configuration? This will affect the value of your Winchester.I will also need to know the amount of overall finish remaining on your Winchester model 1876?This greatly affects the value of your rifle/carbine.I would also need to know if our rifle has any special order features that were available during this time span,such as a half magazine,checkered forearm and stock,color cased hardened frame,and either round,octagon,or half round and half octagon barrel.If you are willing to provide this info you can post it to my message page here or post it at Wikianswers.com as you have already done.