0
The capacitor in which only a specific number of electric lines or electrons can pass through a unit area is called as 'Flux Capacitor'
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Difference between leakage flux and mutual flux?
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
What are the differences between the natures of dc flux and ac flux?
dc flux is caused by dc current (flux and current are proportional), it is a constant value. Put an inductor (or transformer winding) across a battery and you will get dc flux. ac flux is caused by ac current (flux and current are proportional), it is a moving value, the flux moves with the current, typically cyclical but the waveform is arbitrary as long as we're moving.
How does flux increase?
Flux incresed with the increase of scalar quantity
Why transformer is called constant flux machine?
when a load is connected to a transformer current(say I2) flows through secondary coil thus an M.M.F (N2I2) is produced ,this produces the secondary flux. This flux reduces the the main flux induced in the primary & also reduces E.M.F E1 in the primary As a result more current is drawn from the supply. This additional current drawn is due to the load component(say I2' ) This I2' is anti-phase with I2.This I2' sets a flux which opposes the secondary flux & helps the main flux. The load component flux neutralises the secondary flux produced by I2 .The M.M.F N1I2' balances N2I2.Thus the net flux is always at constant level. As practically flux is constant,the core loss is constant for all loads. Hence a transformer is always called a Constant Flux Machine.
Can a Lincoln Electric Handy MIG Welder use flux wire?
Yes it can. I use flux core wire because there is no need for gas with flux wire.
Where is the horn relay on a GMC Vandura?
Next to the flux capaciter, in models 80-88 Ninety and up it's under the gas tank.
What is the purpose of a capaciter?
To block DC and store energy
Why use capaciter?
it stores an electric charge for a short period
How much does a central air capaciter cost?
It normally runs $30-50 installed.
Difference between flux linkage and flux leakage?
i) leakage flux is those flux which goes through the air and linkage flux is those flux whose go through the cell. ii)leakage flux is the loss at flux but linkage flu is warning flux. iii)leakage flux is cause of eddy current loss and linkage flux is case of copper loss.
What is leakage factor?
The Ratio of the total flux ( flux in iron path) to the useful flux (flux in air gap)
Difference between leakage flux and mutual flux?
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
Difference between mutual flux and leakage flux?
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
In transformer core flux depends on voltage whereas leakage flux depends on current?
In a Transformer, Core flux is the difference of primary flux and Secondary flux which are opposite to each other in direction. There difference is equal to the no load flux at all loads. So, some of primary flux passes through the core and remaining becomes leakage flux (Because Secondary flux forces it to get out of the core). Same is the case with Secondary flux. Now, flux is directly proportional to Voltage and Current. When Current increases due to increased load (and voltage remains same): Then both primary and secondary flux increase. Because both of them increase, so there difference remains same. And all remaining flux is forced out. Hence leakage flux increases with current, but Core flux remains constant. When Primary Voltage is increased: Then only primary flux increases. So difference of this new increased primary flux and previous same secondary flux increases. Hence Core flux increases with voltage, But leakage flux does not. That's how In transformer core flux depends on voltage whereas leakage flux depends on current.
Do you need a power capaciter on an aplifier?
Amplifier will get you more power and will last longer if you use good size fuse for it.
What does flux gusto mean?
Flux gusto
What is the difference between magnetic flux magnetic flux densitymagnetic flux linkage?
light speeeed mofos
