A push-pull throttle is a very misunderstood thing. It is a dual cable throttle operation where in the pull cable is what opens the throttle plates. And, the push cable along with a throttle return spring is what closes the throttle plates.
The throttle cable goes from the 'gas' pedal to the carburetor or throttle body to control the speed of the engine. On cars the brake cable goes to the emergency brake, on some motorcycles the brake cable goes to the brakes. (The main brakes for cars and some motorcycles are hydraulically operated, not by a cable.)
If you ride motorcycles you use the "throttle" to make it go.
The throttle cable is located on top of the throttle body.
The throttle cable is not adjustable.
The throttle cable does not go from the transmission to the throttle body.
There is no adjustment on the throttle cable.
On the throttle body, opposite of where the cable attachOn the throttle body, opposite of where the cable attach
how to replace throttle cable on grizzly 600
I had a stuck throttle on my 1996 Passport. The throttle cable had a piece of protective black rubber around the throttle cable between the outer cable covering and where the cable connects to the throttle body. The rubber had began to come apart and some of it was getting inside the throttle cable covering, causing the throttle cable to bind. I removed the rubber piece and cleaned out the cable by covering it with GOOF-OFF and then sliding the cable in and out until my cleaning rag was clean when I wiped off the cable. I did not replace the rubber piece and have had no problems since.
On the throttle body, opposite of where the cable attach,On the throttle body, opposite of where the cable attach,
There is not speedometer cable on a 1996 Honda Civic. There is a throttle cable. Top replace this unhook it from the throttle body and gas pedal. Hook on the new cable to snake it through the firewall. Properly hook the throttle cable to the gas pedal and throttle body.
Were can I buy a throttle cable for a 97 geo metro