Grease fitting or allimite making a way for grease to be forced into mechanical points that need grease to prevent wear and make movement easy.
The grease fitting used mostly on ball joints and bearings to enable grease to be forced in.
there are no grease fittings on the newer cars, all ball joints and steering parts are permanitly sealed.
It takes a standard Zerk fitting. If your having trouble with the Alemite fitting on the end of the grease gun, it may be worn out or just loose.
There are 3 on each control arm and 4 on the steering arm. The two on the steering arm joints are straight up and easier to come over the frame and down to the zerk style fitting. This makes a total of 10 on a two wheel drive and 11 on a 4x4. I advise giving the first pump on each fitting slowly to make sure you have it firmly set on the zerk style fitting and watch for over greasing where you could blow out the rubber boot seal.
"you can't make this out of styrofoam and duct tape" -zerk "baby's gotta be spanked every once in a while" -zerk "HEY! WHAT ARE YOU LISTENING TO, WUSS TUNES?!" -zerk "okay I'll take Andre the Nerd" -zerk
A zerk is another term for a grease nipple - a metal filling used in mechanical systems to feed lubricants.
zerk sees
Here Comes Mr- Zerk - 1943 was released on: USA: 23 July 1943
The joints from the factory are sealed and can not be greased. After market replacements may have a zerk and be greaseable.The joints from the factory are sealed and can not be greased. After market replacements may have a zerk and be greaseable.
Zombie Family - 2012 Zerk Off - 1.6 was released on: USA: 12 July 2012 (Dread Central)
If nothing has been replaced, None. Some replaced parts have zerk fittings, some dont. Most of them are not greasable unless you ask for them at the parts store.
When you type it in, it only talks back to you