0
Chain switch is an old term for identifying the chain or string that hung from light bulbs that illuminated rooms in homes of the past. Light bulb sockets equipped with a "chain switch" or pull line of metal beads and a string can still be purchased at local hardware stores.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
When connecting chain switch what is done with the neutral wire and white wire from ballast?
no
How do you repair a pull chain switch on a fluorescent light?
Shut off the breaker that supplies the voltage to the fluorescent fixture. Wire the new pull chain switch in series with the black incoming wire and the black wire of the ballast. Turn the breaker back on and your switch will now control the off on operation of the light fixture.
How do you reattach a chain pull for an old ceiling light?
The chain probably connects to a small switch inside the fan body. If you open the fan up, you can see if there's enough chain left to attach a new length of chain.If the chain is completely broken off the switch, you can replace the switch. They are inexpensive and easy to find at most hardware stores.Another answerYes, you can replace the pull chain itself and/or the switch. On most fans there is a chain on the side for the fan - it's usually one pull for fast, another for medium, a third for slow and a fourth for off. The pull chain for the lamp is in the middle on the bottom of the fan, just below the lamp(s).Most ceiling fans with lamps have three small screws you remove at the very base of the lamp. You can unscrew the base and carefully pull it down. If it looks like something you can repair or replace, turn off breaker or remove the fuse that controls the lamp before you continue.The switch is easily removed and disconnected, but one thing you have to watch out for. Many fans do not just use a simple on-off pull chain switch. Some fan lights use a fixture with three or four lamps, and the pull switch will turn on one lamp on the first pull, two with the 2nd pull and all of them on the 3rd pull, then the next pull turns it all off. The switch will have 3 or 4 wires, and you should make sure you label the wires so you can put them back properly.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
Why does the fan not shut off when the light goes on and off on a ceiling fan?
<><><> Four possibilities: 1. Look for a Turn Switch or a Pull-Chain hanging from the fan - if there is one try turning the switch or pulling the chain! 2. A faulty Turn Switch or Pull-Chain Switch near bottom of the fan 3. The switch at the fan has a missing pull chain or string? 4. A faulty wall switch? If nothing is found, someone has hard-wired the fan to keep it on all the time. This would be extremely unusual! <><><> If this is not really a ceiling fan but is actually a bathroom or kitchen extractor fan then the answer you want may be what is given for the Related Question shown below. <><><>
How do you convert a standard light fixture into a pull-chain one?
Shut off the power to the light circuit. Remove the old light switch if there is one. Remove the old lamp holder base. Make a diagram and note how the wires were attached, what colour screws to what colour wire. At the light switch wire nut the two wires that came off of the switch together. The switch plate cover will have to be replaced with a blank cover plate to cover the old switch box. Install the new pull chain lamp holder using the notes and diagram that you made. Some of the lamp holders that have a switch in them will not have terminal screws. The wire to the switch will be the "hot" wire. The other wire from the old lamp holder will be the neutral which should be a white wire. Insert the bulb and turn the power back on. Now the pull chain will control the light rather that the wall switch.
What year did BMW switch from timing belt to chain?
1994
How do you install pull chain switch into existing Fluorescent lamp?
Installing a pull chain switch into an existing fluorescent lamp includes both mechanical and electrical issues. One has to change the wires and the switch mounts to have the two be compatible within the same fixture.
When connecting chain switch what is done with the neutral wire and white wire from ballast?
no
How do you rewire a 3 bulb floor lamp with chain pull switch?
the best way is to replace the switch assembly with a pull chain one; this is tricky to feed the wire through if it is a solid tube; if not it should be pretty easy; but you will have to solder it
How do you wire a pull switch on a hard wire ceiling light that has no switch?
Two options. Change the fixture to a keyed pull-chain, or add a pull-chain adapter to the existing fixture. Both available from Home Depot and others for about $3.
Why does your light not turn off?
Pertaining to what? A light switch, an oven light, a pull chain type lampholder....???
How do you lock a door from inside?
By using the key or switch if fitted. A bolt, latch, drop bar or chain.
How do you wire in a pull chain switch in a bathroom light fixture?
If you are adding the pull chain to an existing fixture then the pull chain switch should have two wires. Wire nut either one to the hot wire coming in and the other to the black wire of the fixture.
How do you know when the solenoid switch is fried?
Assuming you are speaking of the solenoid switch on the starter, if you can remove the starter and take it to your local auto parts store (one of the national chain stores) they can test it for you!
How do you repair a pull chain switch on a fluorescent light?
Shut off the breaker that supplies the voltage to the fluorescent fixture. Wire the new pull chain switch in series with the black incoming wire and the black wire of the ballast. Turn the breaker back on and your switch will now control the off on operation of the light fixture.
How do you reattach a chain pull for an old ceiling light?
The chain probably connects to a small switch inside the fan body. If you open the fan up, you can see if there's enough chain left to attach a new length of chain.If the chain is completely broken off the switch, you can replace the switch. They are inexpensive and easy to find at most hardware stores.Another answerYes, you can replace the pull chain itself and/or the switch. On most fans there is a chain on the side for the fan - it's usually one pull for fast, another for medium, a third for slow and a fourth for off. The pull chain for the lamp is in the middle on the bottom of the fan, just below the lamp(s).Most ceiling fans with lamps have three small screws you remove at the very base of the lamp. You can unscrew the base and carefully pull it down. If it looks like something you can repair or replace, turn off breaker or remove the fuse that controls the lamp before you continue.The switch is easily removed and disconnected, but one thing you have to watch out for. Many fans do not just use a simple on-off pull chain switch. Some fan lights use a fixture with three or four lamps, and the pull switch will turn on one lamp on the first pull, two with the 2nd pull and all of them on the 3rd pull, then the next pull turns it all off. The switch will have 3 or 4 wires, and you should make sure you label the wires so you can put them back properly.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
Where is the oil pressure switch of a 1995 Pontiac Transport Do you have to remove the timing chain to replace it?
No you do not have to remove the timing chain. Look on the PASSENGER SIDE, FRONT ENGINE AREA, MOUNTED REAR OF WATER PUMP.
