Acceptor circuit are series circuit in which indactor and capacitor are join in series there is single path available for flow of current.while in rejector circuit inductor and capacitor are join in parallel more then one path are available for flow of current .
electric potential is potential difference between two points in closed circuit. but electromotive force is potential difference in any open circuit.
The difference is that the serious circuit has just one path, but the parallel has many paths for each thing.
Continuity is checking for a completed circuit including a short circuit. Checking resistance would be checking in ohms resistance of a circuit, motor windings or an open circuit.
Voltage is not an absolute figure. Voltage Difference is the exact term. So, the voltage difference between the two wires in the 220 V circuit will be 220V.
a fuse main purpose is to quickly disconnect a short circuit. when the current passing through it exceed its rated value
acceptor circuit is the circuit which accepts only one frequency and reject the others
because at resonance frequency in LRC parallel circuit,impedance is high, so it minimize the current. thus we say its a rejector circuit .
There are many applications of this acceptor circuit. You can learn more about them with some electrical training programs.
difference between series is one pathway through circuit,difference between parralal is more then one pathway through circuit.
A series RLC circuit when powerd by an AC source of frequeny equal to its resonant frequency is an 'acceptor circuit'
a mlln circuit is a data circuit
what is the difference between miniature circuit breaker and fuse
magnetic circit has a magnet and electri circuit has electricity
electric potential is potential difference between two points in closed circuit. but electromotive force is potential difference in any open circuit.
because of the reactances in the circuit
The difference is that the serious circuit has just one path, but the parallel has many paths for each thing.
THE PARALLEL rlc CIRCUIT IS CALLED A REJECTOR CIRCUIT BECAUSE IT REJECTS DOWN THE CURRENT. THE REASON IS AT RESONANCE THE IMPEDENCE OF THE CAPACITOR BECOMES EQUAL TO THAT OF THE INDUCTOR SO NO CURRENT FLOWS. AT LOW FREQUENCY THE CAPACITIVE REACTANCE IS LOW SO ALL THE CURRENT FLOWS THROUGH THE INDUCTOR AND WHEN THE FREQUENCY IS HIGH ALL THE CURRENT WILL FLOW THROUGH THE CAPACITOR BECAUSE AT THAT POINT THE REACTANCE OF THE CAPACITOR IS LOW. SO WE OBTAIN A V-SHAPED GRAPH WITH THE PEAK OF V INDICATING THE REJECTION OF CURRENT.