DRAM is made with cells that store data as charge on capacitors. The presence or absence of charge on a capacitor is interpreted as a binary 1 or 0. Because capacitors have a natural tendency to discharge, dynamic RAMs require periodic charge refreshing to maintain data storage. The term dynamic refers to this tendency of the stored chrage to leak away, even with power continuously applied.
SRAM is a digital device, using the same logic elements used in the processor. In a SRAM, binary values are stored using traditional flip-flop logic-gate configurations. A static RAM will hold its data as long as power is supplied to it.
by: donaldpelaez@Yahoo.com
SRAM - Static Random Access Memory
use 6 transistor to store data .
Data remains there in the ram when an electronic flow is going
DRAM - Dynamic Random Access Memory
use 1 transistor and 2 capacitor
the capacitors is used to store the data
So the machine should refresh the data periodically
to keep the data.
both are semiconductor memory. semiconductor means that both need continuous voltage or charge to sustain their data.
SRAM used for cache , and store data in the flip flop, no need for refreshing , fast access but more expensive.
DRAM used for main memory , and store data in capacitor, need for refreshing , slow access but less expensive.
dram is material gives sound and sram is the sound itself
•Dynamic cell (DRAM) -Simpler to build, smaller -More dense -Less expensive -Needs refresh -Larger memory units •Static (SRAM) -Faster -Cache
sram and dram
DRAM has a lower price. Further details below:
both are semiconductor memory. semiconductor means that both need continuous voltage or charge to sustain their data. SRAM used for cache , and store data in the flip flop, no need for refreshing , fast access but more expensive. DRAM used for main memory , and store data in capacitor, need for refreshing , slow access but less expensive.
DRAM and SRAM
Dynamic Random Access Memory contents need to be continuously refreshed. When its contents are being refreshed, memory can not be read from nor write to. Another point to note is that DRAM is cheap to manufacture (This could be the only advantage it has to SRAM).Where as in Static Random Access Memory, memory need not to be continuosly refreshed and therefore memory can be accessed at any time. SRAM is expensive to manufacture.
SRAM DRAM SDRAM XRAM is not a form of RAM.
SRAM DRAM SDRAM XRAM is not a form of RAM.
DDR and DDR2
---SRAM--- Static random access memory (SRAM) is a type of semiconductor memory where the word static indicates that it, unlike dynamic RAM (DRAM), does not need to be periodically refreshed, as SRAM uses bistable latching circuitry to store each bit. SRAM exhibits data remanence, but is still volatile in the conventional sense that data is eventually lost when the memory is not powered. The term SDRAM, which stands for synchronous DRAM, should not be confused with SRAM.
This is incorrect. DRAM is a digital device, and so is SRAM. DRAM and SRAM serve the same functions- temporary storage space (or random access memory, hence 'RAM') in different ways. DRAM data is typically refreshed every so often, uses more power than SRAM and is much slower, but also much cheaper and easier to manufacture in huge sizes. SRAM, such as the cache on CPUs, is much smaller and faster, and stores data until it is cleared or the computer is turned off (and in some cases, even without power) but is extremely expensive.