NAPA 25-070825 or Dayco 5070825 These belts will work for installing/bypassing with no A/C
Only if you can tighten the belt without it.
An ac bypass pulley for a 1989 Chevrolet can be purchased at any auto parts store. The cost for the pulley starts at $26.04.
hey had this same prob u cant bypass it but you can buy a bypass pulley but gotta remove the compressor i tried to bypass with a belt but its not enough tension so get the pulley and your good to go
You remove the ac compressor and install a pulley bypass kit from a part store.You remove the ac compressor and install a pulley bypass kit from a part store.
you can not run it without having apulley in place of the a/c compressor because of belt routing. the pulley bracket needs to b custom made
yes you can, just go buy an ac bypass pulley, pull your compressor, and put pulley in its place
remove compressor put a bypass pulley in its place replace belt
Bypass, in what way? Your pulley is broken, and the belt is off. The A/C will no longer work and the compressor will not turn.
You can bypass the power steering pump pulley in your 1993 Buick regal 3.8 liter engine. Measure the distance around the other pulleys, without the power steering pump pulley. Take the measurement to your local auto-parts stores and ask for a belt of that measurement.
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.
AnswerYes,You can bypass the pulley by installing a smaller belt79" belt 790K6. same routing except go under ac pulley and straight to the alternator. don't waste your time buying a bypass pulley.A mechanic asks how this routing would work because it would hit the fan?
if you can reroute the belt to bypass the ac compressor all you need to work out is how much shorter the belt is that you would require
yes you can bypass ac with either a ac bypass pulley made by dorman or get a longer belt
Yes, but if you unplug the wiring to the compressor, the pulley will simply idle without causing the compressor to do anything, unless the pulley clutch is faulty and is constantly engaging the compressor, in which case, you will have to bypass the compressor pulley or replace it. If you must bypass the air conditioner, you will need a shorter belt (by at least 12 inches). It is possible that the stock belt for your motor without air conditioning option will fit, try that option first. Otherwise the proper fit will have to be determined by trial and error or use string to trace the new route and measure its length. The new route should be exactly the same except bypassing the compressor.
If you are wanting to eliminate something like the ac compressor you will need to order the proper belt for a vehicle without that option.
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
presuming that your GT is very similar to my '96 non-GT, yes. There are two belts available. One for cars with AC and one for cars without AC. If you buy the one for the cars without, you can bypass the condenser.
No you can not bypass the ac pulley but you can by a bypass pulley at the part store for about 40$. I just got one for my 2006 ford taurus the ac pump locked up and burned my belt it can take a while to put on but its worth it if you dont mind not having your ac working.
Try this website. You can bypass the AC with this bypass pulley bolted on and use the same serpentine belt as before. http://www.1aauto.com/1A/ACBypassPulley/Ford/FSeriesPickup/1AEPM00022/481685 JS
Check with your local part store for a bypass pulley or belt.
Just buy a bypass pulley and bolt it on.