0
In 0.01 M of HCl, the concentration of the Hydronium ions is 0.01M as well since HCl is monoprotic.
pH = -log [H3O+]
= -log 0.01
= -log10-2
= -(-2log10) = 2
Thus, the pH of 0.01 M HCl is 2.
Wiki User
∙ 12y ago
Wiki User
∙ 11y agopH = -log10[H+]
pH = -log10[2]
pH =2
Wiki User
∙ 13y agoYou mean 0.1 M HCl?
-log(0.1 M HCl)
= 1 pH
Wiki User
∙ 13y agoIn theory ZERO 0 -in practice about 0.1
Wiki User
∙ 14y agoits PH is 3
Wiki User
∙ 12y ago2
Wiki User
∙ 10y ago1,2
Add your answer:
Earn +20 pts
Which is better to adjust pH 1N HCl or conc HCl?
1N - conc will change the pH too quickly. You might want to consider 0.1molar for finer adjustments.
How to calculate pH of 1N HCl solution?
pH = -log10[H+], where [H+] is the hydrogen ion concentration. So, in this case, pH = -log10[1], yielding pH = 0.
What is the pH of a solution of 0.010 M HCl?
Its pH value is 2.
What is theoretical pH value for 1 m hcl solution?
It doesn't matter how much you have, HCl (Hydrochloric Acid) has a pH of 1
Ph value for a very concentrated acid?
Hydrochloric Acid (HCl) pH of 1
Which is better to adjust pH 1N HCl or conc HCl?
1N - conc will change the pH too quickly. You might want to consider 0.1molar for finer adjustments.
How to calculate pH of 1N HCl solution?
pH = -log10[H+], where [H+] is the hydrogen ion concentration. So, in this case, pH = -log10[1], yielding pH = 0.
What is the pH of a solution of 0.010 M HCl?
Its pH value is 2.
Could a strong acid have a value of 0 or 1 on the pH scale?
Yes, 0.1 M HCl has pH value of 1.0, 1.0 M HCl has pH value of 0.0, 10.0 M pH = -1.0 (even negative is possible, but this is about the limit)
What is theoretical pH value for 1 m hcl solution?
It doesn't matter how much you have, HCl (Hydrochloric Acid) has a pH of 1
Ph value for a very concentrated acid?
Hydrochloric Acid (HCl) pH of 1
How do you make 1N HCL from 1N HCL?
Take specific volume of 3N solution and increase the volume three times by adding distilled water.
Which has higher pH value 1M HCl or 1 M NaOH solution?
THE PH VALUE ACIDIC SOLUTION VARIOUS FROM 0-6.9, WHILE THE BASIC SOLUTION VARIOUS FROM 7.1-1.4. THUS ,OUT OF HCL AND NaOH WILL HIGHER PH VALUE
How to prepare 1N HCl solution?
1N HCl is also 1M HCl because it is mono-protic. Therefore 36.5 g of HCl is required per liter or 3.65%. Simply take 100 g of 37% HCl and make up to the 1 liter mark on the volumetric flask. Check the value by titration against 1M NaOH. It should be perfect. If very slightly strong dilute very slightly (calculate) with water and re-standardize.
What is the pH of .25M HCl?
- log(0.25 M HCl) = 0.6 pH ------------
What is the pH of a 1.0x10-4m hcl solution?
- log(0.00450 M HCl)= 2.3 pH=======
What is pH of 1n sodium hydroxide?
１４Type your answer here...
