it means that your TV doesnt work
Reference code s0600 is a Motorola digital receiver message. This message indicates that the channel is currently unavailable.
This means WAIT...We are busy repairing or,updating/upgrading the system and will be back,in service momentarly.Thanks for you'r time.
It can mean a couple things. More than likely it is a return path signal issue which stems from too many splitters lowering the forward signals and more importantly jacking the return levels up way too high. The channels you see the omp with ref code s0200 are switch digital video, they are requested by the box from the provider instead of broadcast all the time. Second reason could be a tuner or internal modem issue. You will see this a lot with pace cable boxes, I see it everyday, very easy fix. Set up an appointment to have a tech come out.
Check your connections between your cable box and your wall outlet. Make sure they are tight. I had that code on my TV on quite a few channels, with no DVR, and no TV Guide, and called Comcast and that's what they recommended, and it actually fixed the problem!
COX communications proc\vides cable tv and internet service in the 89129 zip code.
What is the remote code for Apex TV model GT2015DV CN1202 for a Universal remote
The reference code S0a00 refers to a problem with the signal at the TV outlet. To fix this problem, the customer should check the connection to the television. If this doesn't work, calling the company should be the next step.
its on the manual
Whats the code for westinghouse tv code for timewarner click 5 remote
what is the magnavox codes for cox remote
I use LG and it works fine. For Time Warner Cable, LG code 1178 to be specific.
Without specifics of where you live, this question is best answered by your cable company. Rates vary depending on where you are that they base the rate on your zip code.
It is 2434.
Try 2434 it works with the URC-8820 remote on the 40" TV.
Sony Bravia has several different codes depending on which cable company or satellite company you are using. For Comcast, the code is 10000.
This depends on the cable or direct satellite company you are using to access cable on your television. In most cases, you can hold both the side and the front. From there, hold the remote.
yes, TV channels can be blocked, provided that you purchase a television set equipped with a V chip ( a micro chip that is designed to prevent the viewing of offensive programming), or if you are a digital cable/ satellite TV subscriber, you can block TV channels by programming a security code into the remote control provided with your digital cable/satellite TV box. this security code is your personal code which can also be used to unblock any channels that you wish to view privately.
I would recommend visiting www.tvguide.com. At the site you will be prompted for your zip code and the cable provided you have. After submitting that information you will be able to view all of the TV listings for your area.
Try 1447 or any of the other RCA codes.
465 was found during the automatic programming.