What is the 6 digit factory code for a 94 park avenue radio?
This code is specific to your radio. Contact your local GM
dealer for how to get this code.
This code is specific to your radio. Contact your local GM dealer for how to get this code.
Turn your ignition swith to on position,turn your radio on,code should appear on the screen of your radio. After code appears,enter first digit of your code. wait for first digit to flash. Then enter second digit,wait for flash,Then enter third digit,wait for flash. Then enter fourth digit, wait for flash. Then push * on your radio to except the code.
Its a factory security number to prevent the filchering of the radio The codes vary from BMW radio to radio depending on the serial number located on the back of the radio. If you lose battery power, the radio resets itself (supposedly to prevent theft) and a 6 digit code needs to be input into the radio to re-activate it. You need to take the BMW to your local dealer and they'll remove the radio, input the serial # into their system and it will relay what the 6 digit code is. Hope this helps.
there are buttons on the face of the radio itself that are numbered 1 thru 5, and your car would have come from the factory with a 5 digit radio code, if you can locate the small book that is for the radio someone should have made a record of it on the inside cover, otherwise there is no way of putting the code in unless you already have the 5 digit number, the number was given to the original owner in the form of a card for a wallet from what I hear.
Turn the radio off and then while holding down numbers 1 and 6 turn the radio back on. This will display the 10 digit radio serial number 5 digits at a time. Each 5 digit code will flash 3 times alternately. If you do not have your radio code you will want to write these numbers down so that you can contact the dealer and obtain your radio code. After the radio serial code has cycled your radio should now read CODE prompting you for the radio code. Once you enter the 5 digit code the radio should work. Of course your presets have been wiped out so you'll need to reset those.
Problems removing and reinstalling factory radio on 1997 Geo Prizm. What should I do when the radio displays inop?
You enter the 5 digit code by pressing the radio presets. As there is no 8 on the radio presets the code cannot contain the number 8. To find out what your code actually is go to the Honda Owners website and register your Honda. After registering it you can get the code there by clicking Retrieve Radio/Navi code under quick links. http://owners.honda.com
Hi there. The radio code for the the Nexia is obtained from the serial number of the unit. You need to remove the radio, look for the serial number label on the side, then take the8th digit, followed by the 6th digit, followed by the 4th digit, followed by the 2nd digit. For example, my serial number is 60721203, which makes my unlocking code 3220 which worked a treat. Happy listening!
Radio/Cassette ONLY Switch on the radio and "CODE" appears. Press pre-set button 1. Press either the up or down tunning button until the first digit of the code appears in the display. Press pre-set 1 to store the first digit in the memory. Use either tunning button to select the second digit of the code [until the correct digit appears]. Press pre-set 1 to store second digit. Repeat for the third and forth digit, the display now shows the full four digit code. Press pre-set 1 to store the final digit. if the correct code was inputed the radio will now work!!
You will need to insert the 5 digit code in order for the radio to work. If you do not have the code, the you have no choice but to get the serial # off the radio and go to a Honda dealer. With the serial # they can tell you the code. You must remove the radio in order to see the serial #. Look in the glove box, owners manual, etc for a small card with the code on it. Also look in the owners manual for a 5 digit code written down somewhere. Good luck.