Take all your body mounts out and lift your body a couple of inches and block it and you will be able to get to them with ease.
The 2000 Chevrolet Blazer passenger side kick panel is held in place by eight retaining bolts. Remove the retaining bolts and the kick panel will come free.
there are six bolts in the bellhousing on a v8 Chevrolet transmission
The 1994 Chevrolet Blazer S-10 dashboard is held in place with eight retaining bolts and eight retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
Remove the belt from your 1993 Chevrolet S 10 Blazer power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts.
The 1996 Chevrolet blazer gas filter is in the fuel tank. Drain the fuel from the tank. Remove the gas filter retaining bolts. The gas filter will come out.
Take the positive cable off the battery, then you have to remove the inspection shield on the transmission and then take the two bolts out of the starter
You will need to remove the inside door panel of your 1977 Chevrolet blazer. Remove the window crank linkage. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
Under the rubber boot covering the shifter, there should be 4? bolts. Make sure transmission is in neutral and remove these bolts, shifter should be able to be removed at this time
Remove the positive battery cable from your 1987 Chevrolet Blazer battery. Remove the starter cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
There are many bolts that assemble a transmission, automatic or standard. Be more specific.
Remove the bolts but be prepared for alot of transmission fluid pouring out. You will need a large drain pan.
Begin by removing the engine wiring harnesses. Remove the motor mount retaining bolts. Disconnect the engine from the transmission. Lift the engine out.