Go to www.installdr.com .
buy the hanes repair book at any auto part store it cost about $18.00 it has the color codes you need
what are the stereo wire color codes for a 2002 Chevy impala LS
you need the proper wiring harness to change the stereo in a cobalt or the security features will kick in once you have the proper harness you just have to match wires
Here is a site on eBay http://cgi.ebay.com/Stereo-Wire-Harness-OEM-Chevy-Monte-Carlo-86-87-88_W0QQitemZ110032845206QQihZ001QQcategoryZ64579QQrdZ1QQssPageNameZWD1VQQcmdZViewItem This is a reverse wire harness. Plug it into your car's original harness that went to the factory stereo. The wires that come out of the harness are labeled so they can be easily connected to your new stereo. If you don't want to order the harness, the link has the original color diagram, so if you think you can manage, don't order the plug and just look at the colors and what they coorespond to and plug them into your new stereos harness. Also on eBay or many other places, there are stereo adaptors. This will hold your stereo and it will look much better than a do it yourself job. Plus they screw into the original holes. Hope this helps.
Go to your local Canadian tire and buy a plug that goes from stereo harness to your stock harness!
I have a Lincoln VII LSC installing a Jensen stereo, have one harness with amplifie. I need the diagram on the color codes for the wires to the stereo and the harness #CK-WHFD2
color code for 2000 Malibu is under lid on spare tire carrier in trunk.
2000 chevy impala sterio wireing color codes
Look in your owners manual.
Go here http://www.modifiedlife.com/1988-chevrolet-caprice-stereo-wiring-color-codes/
The color codes for a 2007 Hyundai Sonata Stereo wiring harness are usually yellow pr green, red or brown, and black or blue. These different color codes are basically used for connection purposes.?æ
My favorite color of Malibu vehicle would be red. It looks great on the 2010 Chevy Malibu. However, I have heard that cops single out red cars for speeding tickets quite frequently.
You need a DIN removal tool, found at any auto parts store. While you're there, you'll also need a wire harness for the new stereo, possibly an adapter kit, some butt connectors and maybe a krimper. Expect to spend close to $40 for these items. Connecting the wire harness to the stereo is as easy as color matching. Slide the stereo sleeve into place, connect the harness and slide the stereo in.
dex-cool coolant---it is orange in color.
buy the wiring harness adapter for 14.99
Go to Wal Mart or Autozone and buy the harness adapter kit. Wire the connector to your stereo, and then plug the connector in the factory stereo harness and you are done. Easiest and cleanest way to install aftermarket stereos. Cost less than $20. or........ go to www.12volt.com.....right there hey have the wiring diagrams for almost n e thing
go to a place where they sell car stereos and ask for a wire harness for your van they only cost about 20 bucks and they pulg into your factory wire harness and the harness wires should be color matched to your stereo if it an after market stereo
if you go yo a store that sells car radios they should have adaptor harnese for your chevy for oem hookup
A 1997 Chevrolet Silverado radio wiring harness color codes chart can be obtained from most Chevrolet dealerships. The wiring harness color code chart can also be obtained from most auto-parts stores.
73 chevy c-10 350 v8 need fuse box wiring harness color coded diagram
The color codes are different depending on the model and year. Your best bet would be to go to a best buy, circuit city, or aftermarket stereo shop and buy the wiring harness for your car. They are relatively inexpensive and easy to install.
The Factory stereo amp is located above the gas pedal. It is mounted on an angle and has a wiring harness with 10 wires connected to it. Wiring Color Codes: Red/Tan: RR Door White/Tan: LR Door Black: Ground Orange:Positive Blue/Light Blue/Brown/Yellow: Input from Stereo
all I need is what the color codes from the stock wire harnes to connect to the new one