Bore and stroke is 4 x 3.48 inches or 43.75 cubic inches per cylinder. the correct answer is 76 cc .
76cc
The combustion chamber size of the heads with the casting number 376450 is 60cc. It is possible to install larger valves.
75
Should be 74cc
1993 350 what? check auto.consumerguides.com
if you make the combustion chamber smaller for example by shaving the heads when the sparkplugs ignites , the piston will get pushed down harder there for make your engine go faster .In short, reducing the combustion chamber size increases the combustion ratio which increasing the explosive force of the air fuel mixture when it burns. The negative side of this is fuel with a higher octane rating will have to be used to run the engine.
60cc
stock 350 heads are 72 or 74 cc
The chambers are 60cc. The heads are from 77-78 307 engine.
There is no Chevy 4.3 V8. The 4.3 is a V6 followed by a 4.8 V8
A stock Camaro car has 58cc combustion chambers. You can easily increase your compression by using a thinner head gasket.?æ
Depends on the heads. The size is different for the exhaust valve and the intake valve, and different engines have different size valves. The valves are mechanical devices in the engine heads that open and close. The intake valve opens to let the air/gas mixture into the combustion chamber,. Both valves close the combustion chamber during the compression stroke, and the exhaust valve opens to let the burnt gas out during the exhaust stroke.