0
What is the compression pressure psi for a 1994 Chevy Beretta with a 2.2 liter engine.?
Wiki User
∙ 16y ago
anything over 100 p.s.i. is fine anything under and you either have a bad ring or a valve is not sealing...
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Why does the oil pressure in a 90 Chevy Beretta drop to 0 when the engine warms up?
it may be the oil pressure sender located on the engine
Where is the freeze plug on a 91' Chevy beretta gt?
i have a 1994 Chevy beretta and they are under the engine
Will a 2.8 engine from a 1988 Chevy beretta fit a 1989 Chevy blazer?
Yes it will, but you have to put all the blazer engine stuff onto the beretta engine...
Where is the temperature sending unit for a 95 Chevy beretta?
The temperature sending unit for a 1995 Chevy Beretta is on the front of the engine. It is between the front of the engine and the radiator inlet/outlet.
How do you determine the compression stroke on a 350 Chevy engine?
Remove all the spark plugs and turn the engine over by hand. Place your thumb over the #1 plug hole and you will feel the pressure on the compression stroke. A compression gage will also tell you when you are on the compression stroke.
What is the biggest engine produced in the Chevy Beretta?
The Chevy Beretta biggest engine ever produced would be there 3.4 liter v6 which was actually faster then the camaro in the same year of production.
Are the transmissions in a 1989 Chevy Beretta and a 1992 Chevy Beretta interchangable?
depends on engine, mounting, body, ecm, and about a million other things, but possibily
Where is the vacuum line on a 2000 Chevy Silverado engine?
The vacuum lines on a 2000 Chevy Silverado run between the intake manifold and multiple valves across the top of the engine. The vacuum pressure is generated by the engine's compression.
Was is the psi on a 305 cylinder 1997 Chevy pickup?
Tire psi? Engine compression psi? Radiator cap psi? Engine oil pressure psi?
What should the cylinder compression pressure be for 1991 Chevy s-10 2.5 liter engine?
It varies from one engine to the next but, what you want to see is that all the cylinders compression readings are within 10% of each other.
What grade of gasoline does a Chevy Beretta engine use?
All Beretta engines (with the exception of the Quad 4) are designed to run on regular (87 octane) gasoline. You should not need to use a higher octane fuel unless you have modified the engine internals and increased the compression ratio.The Quad 4 engine runs on premium (92+ octane) fuel.
Where is the water pump located on a 1991 Chevy beretta?
On the front left of the engine.
