Spark Plugs and Wires

What is the correct gap for spark plugs in a 1998 Toyota tacoma?


Top Answer
User Avatar
Wiki User
2007-08-26 17:58:49
2007-08-26 17:58:49

The correct spark plug gap will or should be found under the hood on a sticker from the manufacture, look at all the information under your hood, it should be there.


Related Questions

how do I change spark plugs on 2002 Toyota tacoma v4

Sorry, but you are badly mistaken. There are six spark plugs on the V6 Toyota Tacoma.

When changing the spark plugs on a 2006 Toyota Tacoma make sure the vehicle is off. Use a spark plug socket and pull the spark plug wires. Remove the old spark plugs and properly space and install the new parts.

they are attached to the ends of the spark plug wires

The 2006 Toyota Tacoma V-6 engine spark plugs can be removed with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs.

You can change the spark plugs on the 1997 Toyota Tacoma yourself. Remove the ground wire and spark plug wire. Remove plug. Replace the plug with a plug made specially for your model car.

4 if it is a 4 cylinder and 6 if it is a V6.

I just got spark plugs from a local napa store and the gentlemen told me to gap the plugs before installing. .032

There are 6 plugs 3 are on the driver side and 3 are on the passenger side alone with the coils

position of spark plugs on 2003 Toyota coralla

A 2007 Toyota Prius has 4 spark plugs.

There better be. I just spent a little over $40.00 getting them replaced.

The 2000 Toyota Avalon spark plugs can be located on each side of the engine. The spark plugs will be near the bottom of the engine. There are three spark plugs on each side.

How do you change spark plugs in a 6 cly Toyota Camry?

How do I change spark plugs on Toyota rav 4 2003

How do I change spark plugs in 2009 Toyota Corolla? whaT TOOLS I NEED

I just put Denso Iridium spark plugs in mine (part #IK16): But these are by no means the only kind of spark plugs you can use. Before these I had SplitFire Platinum.

See here. use gas line to get the plugs out - they are hard to reach and this will prevent you from stripping the threads when putting the new ones in.

To change spark plugs on a 1994 Toyota Camry, remove the black shafts. The spark plugs are down the four holes. Use a socket set with extension to reach the spark plugs. Replace old spark plugs with new ones.

Replace all the spark plugs and plug wires. If that does not solve the problem look at the coils.

Some one got lazy and did not change them all. Or chose not too do the hard ones.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.