Spark Plugs and Wires
Chevy Suburban
Mazda Trucks

What is the correct gap setting for a Mazda B2200?

404142

Top Answer
User Avatar
Wiki User
2009-09-30 05:17:10
2009-09-30 05:17:10
Answer

.031 is the spark plug gap for the b2200. I do know this for fact I bought my 1987 b2200 new,I def know this to be correct after 22yrs of ownership.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Most likely .032, but check to be certain...I have a '91 B2200 and am assuming it to be the same.

User Avatar

The correct spark plug gap is 0.052 inch. Try to look for spark plug brands that fit the Mazda M.P.V. engine and already has the factory gap set near to this correct setting.

User Avatar

Gap is 0.031 or 31thousandths. your truck has the 2184 cubic inch engine.

User Avatar

I found the correct gap setting for the 1994 Mazda B4000 to be .054. As found at the auto parts store and Advanced Auto.

User Avatar

0.031 thousandths. or just 31 plain and simple.

User Avatar

Checked my '90 B2200 owner's manual and it sez: Carb: 0.031" (+/- 0.002) Fuel injected: 0.043" (0.004)

User Avatar

The spark plug gap should be set at 0.032 of a inch with a gap setting tool.This is simple and also suggest using ngk plugs(normal oem replacement) not platinum.Go with these for simple low cost,and ease of install and removal.

User Avatar

Plug gap for the Mazda B1800 should be .031" +/-.002" Kyrasis6 -Mazdatruckin.com

User Avatar

1997 Mazda 626 2.0L MFI DOHC 4cylThe Spark Plug Gap.044 (In thousandths of an inch)

User Avatar

Correct gap is .045 for the 3.1 engine.

User Avatar

.032 on an 89. You can verify at partsamerica.com and enter your vehicle.

User Avatar

In most cases the plugs you buy are already gapped to the correct setting, but you need to get the correct ap size and a feeler gage, slip the feeler gage between the plug gap and either pry it apart until the gage fits up to the correct size, or close it back down till it does. Either way you will need the gapping tool, and the correct gap setting.

User Avatar

Underneath your hood, there should be a series of 2-3 stickers... a listing for spark plug gap should be seen there.

User Avatar

.054 inch ( .044 inch if compressed natural gas )

User Avatar

The correct gap as listed on the under hood label is .060

User Avatar

What is the correct spark plug gap setting for a Mercury outboard 2003 200 HP EFI

User Avatar

My owners manual says the gap is .043. It is listed in the spec. section under electrical systems. Same gap for both 1.6 & 1.8liter engines.

User Avatar

In my experience ilook in the hood for a stikerand it may be .039 to .043inchesbecause i have 1993 probe and it has the same engine as Mazda 626 engine (Mazda is owned by ford)so parts are same and they will fit any engine _2.0l or 2.5AnswerThe proper gap for a 2000 Mazda 626 would be between .039 and .043-inch.

User Avatar

What is the spark gap plug setting on a 2007 Honda accordAnswerwhat is the spark plug gap setting on a 2007 Honda accord?

User Avatar

The correct maker point gap setting on the 1972 model, 20 hp Mercury outboard is .020in.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.