Home & Garden
Lawn Mowers and Garden Tools

What is the correct spark plug gap for a toro lawnmower?

424344

Top Answer
User Avatar
Wiki User
Answered
2007-10-06 20:48:12
2007-10-06 20:48:12

The correct plug gap for my Toro GTS 6.5 horse mower is 0.035

012
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

User Avatar
Anonymous
Answered
2020-08-09 17:15:22
2020-08-09 17:15:22

.0×25

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


You will need to get the spark plug from the manufacturer. You can find out this information by calling them or looking through the users manual.



It is probably a Briggs & Stratton engine. You will need to supply the model number from the engine to get a correct gap.


where isfuel filter on toro lawnmower where isfuel filter on toro lawnmower where isfuel filter on toro lawnmower where isfuel filter on toro lawnmower


Before working on the Toro model 20017 lawnmower, disconnect the spark plug. The drive belt is visible under the mover. Use a ratchet to remove the blade. The drive belt is now accessible and can be easily changed.


how to replace plug wire on a toro mower


Tecumseh Part #611049 - Champion Spark Plug #RCJ8Y



Champion RJ19LM will work.


Get a spark plug socket and wrench that fits the plug body and remove it by turning counter-clockwise.


In order to change the spark plug wires in a Toro lawn mower, the engine housing should be removed. The spark plug wire will then be disconnected which is a simple twisting movement under pressure. This is a very quick procedure.


http://www.toro.com/home/customercare/interactivemanuals.html Snowthrowers Single Stage Snowthrower TOC Maintenance Spark Plug Conditions Page down to Replacing a Spark Plug


You will need a Champion RJ18YC/130-435 spark plug. Gap it to .30. You can buy them here: http://www.jsesc.com/


The spark plug may be fouled. Remove the plug and check to see if it needs to be replaced.


i have to say Honda or toro


dont know just got mine but it had a champion h10



Toro Briggs & Stratton 6.0 77-7330 relace with: Champion RC12YC .030 gap


My S200 has a Champion RJ18YC plug installed or a Number 58. Gap should be .030 inch.


Autolite lists it as 2976 or SE2976DPT. I haven't installed the plug yet so I can verify.


I need a Electrical Wiring Diagram for a Toro 15-44HXL Lawn Tractor


Remove the two screws that attach the panel that the key is located on. The plug will be in the upper lh corner.


Mounted on the fuel line between the fuel tank and the carb if it has one.


The spark will depend upon the type of engine being used, either 2 cycle or 4 cycle. If it is a 4 cycle, chances are the engine was produced by either Tecumseh or Briggs.


You have to remove the top plastic cover. There are screw heads inside the the propeller area and then two on each side. You will have to remove the gas cap also to get the cowl or cover off. You will be able to see and remove the spark plug.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.