If the truck is equipped with a V6 it will most likely have a timing belt. However if it has the 4 cylinder it will have a timing chain.
It has a timing chain.
Yes, click the link and chose the correct engine.
If it's a KA24E engine it's 1,3,4,2.
The 2.4 liter 4 cylinder in a 1997 Nissan Pickup has a timing CHAIN
HOW DO I INSTALL A TIMING BELT ON A 4D56 ENGINE
It has a Timing Belt.
try changing both timing gears
Yes but why would you want to? The KA24DE is superior to the Z24 in many ways
V6 = Belt 4 cyl = chain
how do you set timing on a 1985 350 gmc truck
Some parts on a 1991 Nissan truck are compatible with a 1994 Pathfinder. The alternator, battery, and other engine parts are compatible if they are the same engine size.
Belt manufacturers recommend changing timing belts every 60,000 miles.
Sounds like the timing chain adjuster is worn out. It is actuated by oil pressure. Was it replaced with the timing chain?
go to autozone.com,enter yearof vehicle,model,make,and engine size,then click on specifications and it will tell you,you can also get a haynes repair manual .
The 2.5 liter has a timing BELT
That truck does not have a timing belt. It has a timing chain that will last the life of the engine.
That requires an OBD2 engine scanner to set the timing. You can NO longer use a timing light.
You can't it is nonadjustable, The timing is controled by the computer. And there is no reason to adjust it unless you had the distributor out of the engine and in that case you will need to turn it by hand enough to get it running, and that is called the base timing. Then you will notice that the check engine light is on and you will need an OBD2 engine scanner hooked up to the truck and then go into the timing mode and ajust the timing to factory spec. and the scanner will let you know when you have the timing correct. The check engine light will go off when you have the timing right. Then the computer will do the rest.
ZERO TOP Dead center.