Top Answer

in steps 30 lb 50 lbs 65 lbs final 13 5 2 10 17 9 1 6 14 16 12 8 4 3 7 11 15 `

🙏

0🤨

0😮

0😂

0Loading...

you need to get a chiltons repair manual from the library for your year car to find that out.

Check www.60degreev6.com -Kyle slipdunk2@hotmail.com

all small Chevy heads are 65 ft lbsin a circular motion from the center out

33 ft. lbs. plus an additional 1/4 turn on the bolt. Don't forget that there is also a torque sequence as well.

Tighten the bolts to 60 nM (44 ft. lbs.) in sequence. Tighten the bolts to 60 nM (44 ft. lbs.) in sequence.

65ft lbs

torque setting for 2005 chev aveo

I need head bolt torque specs and sequence on 2003 Chevy Malibu 3.1

What is cylinder head torque specifications for 97 Chevy lumina 3.1 v6

torque specs 350 Chevy heads65 lbs

2004 chevy aveo 1.6 head bolt torque specs

criss cross

75 Ft LBS.

torque, in sequence, to 35-40 ft-lbs, then repeat at 65-70 ft-lbs in sequence.

40 lbs

You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

89 inch lbs.

torque especifications for Malibu 1999 3.1 engine

The cylinder head bolt torque for a 1999 Chevy Venture is 44 ft lbs. If you have a GM special service tool # J36660A, use that to turn the bolts an additional 95 degrees.

the sequence is the two center bolts on each side, the work your way outwards

first off what are you tourgueing when you figure that out repost your question

As for powertrains, the series begins with a 2.2-liter in-line-four base engine that's good for 120 hp at 5000 rpm and torque of 140 lb-ft at 4600 rpm.

65 ft lbs

65 ft-lbs

65 ft lbs.