# What is the definition of stem leaf and plot?

# What is a stem-and-leaf plot?

an arrangement of data for 2-digit numbers , the tens digits are shown as the "steams" and the ones digits as the "leaves" Example: 19,22,25,26,27,28,29,30,34,36,37,42,43,44,46,48,48,49,52,53,55,57,58,62

# Where did the stem and leaf plot originate from?

It originated from the greek. The Greeks started laying the foundation for the math we have today. Like Euclid who was the founder of the math we now call geometry which is the study of shapes.

# What is the purpose of a stem and leaf plot?

to simply organise your numbers.ajm If you can make a histogram, a dotplot, or even a boxplot; there is no reason to do a steam and leaf plot. It's the worst graph. With a stem and leaf graph, you can see the distribution of data points, and determine whether it's normal distribution or not. As men…tioned above, there are better graphs for doing that, though. ( Full Answer )

# What is a double stem and leaf plot?

A double stem-and-leaf plot is also known as a back-to-back stem-and-leaf plot. Instead of there being a stem on the left side and its leaf on the right, the stem is in the middle, with a leaf on the right and a leaf on the left. It is used to compare sets of data. For example, the number of homerun…s hit by National League teams vs. American League teams. ( Full Answer )

# How do you do a Stem and leaf plot with hundreds?

Class Scores: 75,8,36,36,55,55,27,83,17,58, 55,42,36,50,42,82,27,92,50,42, 100,83,27,58,55 Your score out of 100 is at the end of this message. All the grades are listed. The scores go from 8 to 100. The Stem-and-leaf is: N = 25 Median = 50 Quartiles = 36, 58 Decimal point is 1 place to the …right of the colon 0 : 8 1 : 7 2 : 777 3 : 666 4 : 222 5 : 00555588 6 : 7 : 5 8 : 233 9 : 2 10 : 0 ( Full Answer )

# What is the definition of double stem plot?

A double stem plot is a graphical method for displaying the valuesfrom two samples whose values extend over similar ranges. Assumingthat you know what a (single) stem plot is, begin making a doubleone by using the smallest element from the two samples to form thefirst item for the stem, and place it… at the top of the stem. Nowcomplete the a stem plot for the first sample in the usual way onthe right side of the stem. Having done that, create the leaves forthe other sample elements on the left side of the stem. The linkpoints to a page with an example. ( Full Answer )

# Double stem and leaf plot?

A double stem and leaf plot is a stem and leaf plot but there is a number in the middle and one number on each side to distibute data

# What is a Back to back stem and leaf plot?

A Back-To-Back Stem and Leaf Plot is a diagram to show two different sets of numbers. They are exactly like ordinary stem and leaf plot, but represents two different numbers by going out to the left as well as the right.

# On a stem an leaf plot vary?

it varys like ......since a stem and leaf plot is side ways...on the left side is the tensand on the right side is the ones .
3 l.

# Which type of data cannot be used in a stem and leaf plot?

Data that is too narrow or too wide (small or large) as it cannot fit into a steam and leaf plot considering the purpose of a steam and leaf plot (how it breaks down the numbers that have 2 or more digits). A steam and leaf plot has 2 separate columns that separate the value of numbers into those 2… sections (although if there is less than 2digts or if there are too many, the process will fail). ( Full Answer )

# Find the range of stem-and-leaf plot?

highest row right side number put to the right of greatest number on the same row on the left= first #. Then get the bottom row right side number on the right of the lowest number on the left side of the same row. That is second #.
first number - second number= Range

# What are some benefits of recording data on a stem and leaf plot?

There are many benefits of using a stem and leaf plot in the analysis of data. A stem and leaf plot can be constructed quickly. The value of each data point can be recovered from the plot. The data is arranged compactly because the stem is not repeated in multiple data points.

# How do you solve a stem-and-leaf plot?

First you have many different numbers. Then you make a list down such as O | 7 meaning its 7, or 2 | 9 meaning its 29. You set these all in order from 0- the last number you have.

# What is the meaning of the stem and leaf on a stem and leaf plot?

It's a a visual organization of a list of numbers (usually used in statistics) that displays the numbers in two columns: the stem on the left and the leaf on the right. The stem contains a list of every number except the right most for each number. So for the number 20, the stem would be 2. For the …number 170, the stem would be 17, and so on, listed in order from smallest to largest. The leaves, separated by a vertical line from the stems, contain only the right most digits from each number, next to the appropriate stem. So for 25, the leaf would be 5 next to the 2 stem. When stems have multiple leaves the leaves are ordered from the stem out in order from smallest to largest. ( Full Answer )

# Can a frequency table make a stem-and-leaf plot?

yes but you need the exact numbers from the intervals in the table to make a stem and leaf plot.

# Why use stem and leaf plots?

it is simply another way to plot data and look at the distribution. It is similar to a histogram except the leaves are horizontal instead of vertical. The advantage is in a stem and leaf plot you have listed all the values, unlike a histogram which gives you a range of values the data fall into.

# What is a disadvantage of using a stem and leaf plot?

Some disadvantages:.
Cannot be used for categorical data..
Difficult with large number of observations..
Not very good if there are many stems with no leaves (you must show bare stems). This can be a problem if there are outliers..
Ideally require leaves to be ordered on each stem - hard work.. …
Tricky to use (though not impossible) if decimal stem/leaf are not the optimal solution. ( Full Answer )

# What is the definition of a stem and leaf plot?

It is a graph that basically puts a group of numbers in order. A graph used to organize and display data so that thefrequencies can be compared.

# Hundred number stem and leaf plot?

when it is a hundred stem and leaf plot you would put the first two numbers of that number in the stem part; and the last number in the leaf part and you would continue on as if it were a two digit number.

# How do you do a stem leaf plot?

You put 0, 1, 2, 3...etc, etc on one side of a line.....On the other, you put your numbers... The 1 2 3 4...etc stands for 0-10, 20, 30, 40, 50.... and you just ad the units digits... twenty NINE, thirty NINE SO say you have 19, 29, 34, 35, 36, 37, 37 39, you kind of do this: And there's a …line vertically in between 1, 2, 3.... and the other numbers (where the big space is) 1 9 2 9 3 4, 5, 6, 7, 7, 9 4 Anyway, something like that...Sorry if it's not that clear! ( Full Answer )

# What does the leaf represent for stem and leaf plot?

The leaf represents the ones digit in a number. For example- the stem is 1, the leafs are 2, 3 and 4. 1/2= 12, 1/3=13, 1/4=14.

# How do you find the median in a stem and leaf plot?

to find the mean add all the numbers up then divide by how many numbers there are. EX. 1 2 3 4 5 6 step 1. add all up =21 step 2. divide there are 6 so take 21 and divide by 6 and theres ur answer which is 3.5

# How do you make a stem and leaf plot with decimals?

You use the stem in the place of the decimals and make a key such as 4 (line) 1 = 4.1

# How do you get the key in a stem and leaf plot?

Here is the marks that each student has got after an exam in the class ploted out in a stem and leaf plot. 1-0234 2-34 3-56 4-678 5-0 6-134 7-689 8-049 9-26 Now for the key... Key: 6-9 means 69 The key is based on entirely what numbers you have used in the stem and leaf p…lot. The key is just the meaning for what sort of digits you are trying to talk about. If we don't use keys. Then when we look at 2-3, we might think that it is 2.3 Anyway you can get the key by looking at what data you are doing and just take out one section of the data. Here is another example: Here is the amount of pocket money received by a group of children represented in a stem and leaf plot: 1-345 2-167 3-89 Key: 2-6=2.6 In other words the key is just like the legend on a map. Just by looking at the stem and leaf plot you should be able to find it. I don't know if this would help... But I hope you would find this useful!! Good luck in stem and leaf plots! it is an example of the numbers. ( Full Answer )

# How do you do stem and leaf plot worksheets?

It's pretty easy first u have a set of numbers for example 2,3,4 20,26, 33,34 and first u c wich is the lowest and highest and 2-34 so u go from 0-3 then u draw a chart and put stem on the left and leaf on the right and then u put 0,2,3 under stem then u take 2,3,4 put beside the zero but underneath… the leaf and then for 2 u have 20 u drop the to and put the zero it's really simple but here's a key I hope this helps ya 2/0=20 I hope this helps u out .... Btw if anymore questions just ask :) ( Full Answer )

# Why should you use stem and leaf plots in data sorting?

it is simply another way to plot data and look at the distribution. It is similar to a histogram except the leaves are horizontal instead of vertical. The advantage is in a stem and leaf plot you have listed all the values, unlike a histogram which gives you a range of values the data fall into.

# Why you use stem and leaf plot in data sorting?

we use sem and leaf plot in data sorting when there are lare amounts of numbers to anyalyze.

# How do you find the key of a stem-and-leaf plot?

To find the key is very simple just take one numbers from there and teach your reader how to read that number EX: 6/8= 68 Just pick a random number and show them how to read it.

# What is the definition of a stem and leaf graph?

The stem is the tens place, and the leaf is the ones. The leaf has a few choices. It's used to place a number.

# When do you plot stem and leaf graph?

If you are still in school, do it when ever you are trying to find the answer to a question that calls for such a graph... in real life use it in an example like ages to find the different ages and putting them in catogories. a stem and leaf plot is not that hard to do... example: 12,13,14,15,16,…17,18,19,22,25,29,30,30,35,36,40,44,50,75 ___________________ 1|2,3,4,5,6,7,8,9 2|2,5,9 3|0,0,5,6 4|0,4 5|0 7|5 NOTE that it will look a little different but that is the general idea ( Full Answer )

# What explains the information on a stem-and-leaf plot?

here is an example-- numbers: 13, 24, 33, 35, 37, 38, 45. 1 l 3 2 l 4 3 l 3 5 7 8 4 l 5 the first digit of the number goes on the left of the line and the second digit goes on the right side ( if it is a two digit number). if it is a three digit number (example: 123), then you put the… first two digits ( 1 and 2) one the left and the third (3) on the right. only the last digit (per number) goes on the right. ( Full Answer )

# Is a stem and leaf plot a graph?

A stem and leaf plot is not a graph, but it is a table. You can turn it into a graph, a histogram, but it is simply a table that organizes your numbers.

# What is the purpose of a stem leaf plot?

The main purpose is to summarise statistical data for fairly small sets of discrete data.

# Useful aspects of stem and leaf plot?

hi in stem and lef plot u can see the bigest and smallest obseravion in ur sample clearly ! u can see how ur data is treating that is skewness of ur obseravtions will be clear in plot , u can see how much ur data are far from together

# How do you make a stem and leaf plot on computer?

Just by putting the numbers with the same first digits in groups e.g. 20 27 26 25, in one group and 37 34 39 38 in another, then order them lowest to highest, e.g. 20 25 26 27 and 34 37 38 39. then to draw the stem and leaf diagram its self you take one of the groups starting with the one with the l…owest first digit and you put the first digit (the one you have grouped it by on the Left had side) so for the example this would be '2' or '3', these represent the group the numbers are in in this case the twenties or thirties, a line is then drawn next to the number and the second part of the number is entered e.g. for 27 the 7 would be put in fill in all the second digits of the numbers in ascending order on the right side of the first digit, with any numbers that are the same just being repeated. then do this for every group. e.g. 2|0,5,6,7 3|4,7,8,9 Don't forget to write a key eg '2|5 represents 25' and that's it, hoped this helped :) Alice Smart, 16, Essex, UK. ( Full Answer )

# What starts a stem and leaf plot?

A stem and leaf plot is started by a desire to present numerical data in a visual manner.

# Is a stem and leaf plot the same as a box and whiskers plot?

No, they are two different things. Mainly because the Box And Whisker Plot has a different technique and focuses on highs and lows. The Stem and Leaf Plot has to do with key codes, grouping numbers, and amounts.

# What is an outlier on a stem and leaf plot?

An outlier is an extreme point of data on the plot. It is significantly greater or less than the rest of the data. Example: *50% of the class got 80/100 points on the test *49% of the class got 78/100 points on the test. *However, only 1% of the class got 99/100 points on the test. The s…mall percentage that got the 99 would be the extreme outlier. ( Full Answer )

# Why is a stem and leaf plot is useful?

a stem and leaf plot is so important cause if you turn the plot to the left [counter clockwise] then it will look like an organized graph in order from least to greatest you can find mode, range, and median right a way. glad to help!!!

# What are the differences of a stem and leaf plot and a frequency table?

basically both are part of mathematics's data handling section .They both help us to arrange a large amount of data into data that we can easily refer to ,just like graphs. In a stem and leaf diagram categorises data that are similar for eg. 10 to 19 ,you will therefore in your diagram under put 1 w…hich represents 10 in the stem column and 9 under the leaf column as 9 is not a tenth digit. In the frequency table we use it count how many values of the set digits lie on that particular range . Both these two graphs help us to represent information that will help us to find the measures of central tendency and of dispersion. ( Full Answer )

# What does stem and leaf plot mean in math?

This is an example. A stem and leaf plot is a plot where numbers with more than two digits are broken down into parts. The numbers in the "tens" spot is put on the left side of the vertical line. The numbers in the "ones" spot is on the right of the vertical line. For instance, on the top of the cha…rt, there is a 9. On the other side of the line, there is a zero. Therefore, it represents "90". Beside the zero, there is a 4. So the next number would be "94". The chart is basically used to organize and graph larger numbers. ( Full Answer )

# What are Stem Leaf Plots?

A stem-and-leaf plot is a convenient way to organize data using numerical order and place value.

# When is it most useful to use a stem and leaf plot?

When you have a long list of numbers that are close in value. Example: 54,56,59,55,53,54,69,66,68,67,62,60,61,78,78,79,75,71,94,99,91,93 Bad Example: .19,1449,8791,0.155555555558,90842820,209834578459...

# What is the definition of stem plot?

A stem plot is a graph that displays data by reducing the number of numbers on a page Example: 3|1 =31 Stem plots often look like this 4|1,2,4,7 5| 7,7,8,9,0 and so on...

# What is the word characteristics in the key of a stem and leaf plot?

Try to answer that. Just think about twice before you ask. -Bella Thorne Listen to me and Zendaya's new album:TTYLXOX

# What type of data can be used in a stem and leaf plot?

Discrete data. Ideally over a relatively narrow spread. Discrete data. Ideally over a relatively narrow spread. Discrete data. Ideally over a relatively narrow spread. Discrete data. Ideally over a relatively narrow spread.

# What is a stem and leaf plot that shows two sets of data?

A back-to-back stem and leaf plot. A back-to-back stem and leaf plot. A back-to-back stem and leaf plot. A back-to-back stem and leaf plot.

# How do find the average on a stem and leaf plot?

You would take all the numbers from the data and then divide by the number of numbers added. In a stem and leaf plot, the tens or hundreds, and so on are on the left and the ones are on the right.

# Are histograms related to stem-and-leaf plots?

They are related in the sense that both are visual representations of numerical data. .
More than that, stem-and-leaf plots are most useful when the sample size is small. The plot produced may approximate to a histogram that would be produced if more data were available. When a larger sample is a…vailable it is customary to sort the sample and then split it up into about seven groups such that the middle groups are of about equal width, and then count the number of items in each group to make a histogram. As you will discern, the two processes, one of producing a stem-and-leaf plot and the other of producing a histogram will produce more or less the same result, given a sufficiently large sample. ( Full Answer )

# How do i do stem and leaf plots?

Prerequisite It is helpful to have an understanding of the mean,median and the mode prior to beginning work with Stem and LeafPlots.