# What is the density of vanadium in pounds per cubic inch?

Density of Vanadium=6.118g/cm^3

### What is the density of tool steel?

The density of tool steel varies depending on the chemical composition of the grade. The density range is between .268 and .298 pounds per cubic inch. Most grades tend to weigh-in at about .28 pounds per cubic inch. Grades with a high content of vanadium tend to be slightly lighter than most grades because vanadium is lighter than iron. Grades with a high content of tungsten or molybdenum tend to have a higher density because…

### What is the Moon's average density in pounds per cubic inch?

"Pounds per cubic inch" is not an appropriate way to talk about density. On the average, the moon's density is 3,346 kilograms of mass per cubic meter, and that's the same as about 54.83 grams of mass per cubic inch. The weight of that mass depends on where you take it. If that 54.83 grams of mass were on the Earth, it would weigh about 0.121 pound, or 1.93 ounces. If it's on the surface…

### What is the weight of one one quarter inch thick twenty inch by 20 inch sheet of aluminum?

I looked up the density of aluminum, and found 167 pounds per cubic foot. I would have preferred it per cubic inch, as that would have meant less work, but I guess I can convert it. 1 cubic foot = 1,728 cubic inches. Density of aluminum = 167/1728 pound per cubic inch. Volume of the sheet = 20 x 20 x 0.25 = 100 cubic inches. Weight = 167 x 100/1,728 = 9.664 pounds