What is the difference between LAN and Ethernet cables?
There is no difference between LAN and Ethernet cables. These cables are used to relay internet service to electronic devices equipped to utilize the internet service.
Ethernet cables are used to connect devices with an Ethernet network card together in a LAN.
A local-area network, or LAN, is a network that works over a small distance, typically within one building or business. Ethernet is a type of networking protocol used on a LAN.
Some printers can be part of a LAN and come printers can't be part of a LAN. Most printers that can be connected to a LAN connect via EtherNet cables, but they are now making a few that are Wi-Fi capable I have both a Laser Printer and an Inkjet Printer connected to my apartment LAN via EtherNet cables.
Ethernet Cat 5 or Cat 6 cables are available in different lengths from Best Buy Walmart amazon and Ebay
optical fibers ordinary telephone wires coaxial cables Ethernet (its pin is bigger than ordinary telephone wires)
Internet is the communication of multiple computers over a network Ethernet is a system to connect these computers together to work over a WAN or LAN WAN being the internet.
ethernet is a lan connection.intranet is a private concern network.
RG-58 coaxial cable is used for thin Ethernet.
If you are talking about a LAN, then just making sure that all devices and cables are capable of gigabit speeds.
There is LAN (Local Area Network) which is hardwired through ethernet cable. Then there is WAN (Wireless Area Network) which would be your Wireless G Card using no wires.
Ethernet is a set of protocols to establish a LAN.
In most cases it will be an Ethernet cable with an RJ45 head, both Cat5 and Cat6 Ethernet cables will do. Go into a good electronics store and ask for an Ethernet cable of your desired length, they'll normally be able to make one for you.
A LAN is the physical local network (network cables and network devices); an intranet is a local version of the Internet (a company webpage is accessed with a local web browser and local IP address)
Sort of the same as the difference between a printing press, and the truck that delivers papers to homes. Ethernet is a good way to connect computers together in a local area network, or LAN, so they can communicate with each other or each connect to a separate computer or router. Internet is a good way to connect people to usable information.
You would connect them with ethernet cables and 1 or more switches. If you require more than 1 switch, you need to connect the two switches with an ethernet cable too.
Ethernet is the Technology which is Best Situated to LAN , Ethernet has all Features which LAN Need Like High Bandwidth cost Of Deployement,and Coverage Where as Serial Technology, is Best Situated for MAN and WAN , they received data in packet and transmit to long distance they have Control Signal Also who Safe data from error and Corrupt In Ethernet data are not check Bit Wise(LAck of Control Signal) In Serial Technology data are… Read More
Wireless LAN uses wireless signals to connect your computer, or any other internet enabled device, to other computers. AN ethernet LAN uses an ethernet cable to hardwire your computer to another computer.
An onboard LAN is a built-in ethernet adapter on mother board, if you have an onboard LAN, then, there is no need to install another ethernet card for your purpose.
you can use any of the following cables: 1) Cross Over cable 2) LAN cable 3) Ethernet cable
There r two main differences between LAN & WAN: 1) network having fast speed at least 10 mbps is called lan while wan has slow speed as 64 kbps. 2) wan connects two lan far apart to each other using wan technologies such as leased lines, internet, frame relay, etc. while lan connects two systems/lans near to each other through ethernet/fast ethernet/gigabit ethernet.
LAN stands for "Local Area Network" while it can cover a large area they usually don't. For example an office building generally uses a LAN. And if in a skyscraper that LAN can be quite large. On the same token, if you have a router at your house, and all the computers on that router are connected via ethernet cables. That is also a LAN, but is much smaller.
explain the ethernet lan layouts (10base2/10base5/any other)
IEEE 802.3 is the standard for Ethernet LAN. It is a collection of IEEE standards for physical layer and Data link layer's MAC sublayer. According to these standards, the Ethernet LAN card works. IEEE 802.4 is a Token Bus standard which was standardised by IEEE. It grants the Bus physical topology to use token messages to access physical layer.
WLAN is simply Wireless LAN.
distance covered by lan
man is a person lan is letters
That is a LAN with cables as opposed to wireless LAN without cables. Network cables now mostly used for a wired LAN are UTP (unshielded twisted pair) CAT5E, although STP (shielded twisted pair) and CAT6 or CAT7 specifications are also used. Before COAX cables were used.
LAN cable is the cable used to connect end devices with intermediary devices on a network the term LAN cable normally means Ethernet (the most up to date version is Ethernet Cat6)
You are asked to upgrade a bus topology lan at a friend's house to a star topology lan your friend wants to connect three computers and a printer and use the ethernet access method?
Get a four port switch and make your friend's dreams come through. You will need at least 3 LAN cables of CAT-5/5e at least depending on printer's interface.
Apart from the silly mathematical answer, 802.3 - 802.11 = 0.19, the key difference between IEEE standards 802.3 and 802.11 is that 802.3 governs wired Ethernet communications, while 802.11 governs wireless LAN communications.
There is no difference.
A wireless Access Point (AP) connects a group of wireless stations to an adjacent wired (Typically, Ethernet) LAN. An AP is like an Ethernet hub - except that a hub relays LAN frames only to other 802.3 stations, whereas an AP relays 802.11 frames to all other 802.11 or 802.3 stations in the same subnet. (In English: "it allows communication between wired and wireless..") A wireless router connects a group of wireless stations to an… Read More
In its simplest form - two computers, equipped with ethernet modems, and a suitable length of ethernet vable !
LAN cables help in transferring and receiving data
A wired LAN uses wires to connect the computers but a wireless LAN uses radio waves.
You would use gigabit ethernet in a LAN where you want speed; otherwise, most LANs run at 100 megabits per second, which is considerably slower.
ethernet controller is the device which deals with lan card means local area connection
Cables such as Ethernet, wireless media, and networking hardware is used to connect computer networks to create the internet. A home computer would need LAN or LAN connections, and the ICP or internet connection provider helps to make the complete network possible.
PAN is Personal Area Network and the LAN is Local Area Network.
allows a single computer to connect to a LAN allows a single computer to connect to a LAN
A wired lan uses wires to connect the computers, a wireless lan uses radio waves.
# #* It used to be that Ethernet networks were slower than fiber, T1 and T3 lines. However, Ethernet now has the gigabyte standard, which sends information across the wires at 100 gigabits per second, which is a reasonable speed for home users with several computers networked together. Ethernet is fast enough to transfer large files across a network without waiting hours for the file to complete the transfer. #* Ethernet cables are a standard… Read More
It is possible to play over a LAN connection (ie. though ethernet cable connections between the PCs)
the router as ports commonly used for lan cannection is (Ethernet)
Through that long answer, Rtrahan is correct: the collision domain is the segment to which the computers in question are attached. What causes a collision is when two computers try to transmit at the same time in an "uncontrolled" environment. Since most networks nowadays use switches, collisions are very rare. In the old days when networks used concentrators instead of switches, the various computers would listen to the cable plant to see if anyone was… Read More
It is both. For more info. try this link: http://t1rex.blogspot.com/2007/12/what-is-ethernet-wan.html
You use a Rj-45 connector with twisted-pair cabling in an Ethernet LAN. Rj-45 is a connector with a 4 5 wiring sequence.
The ethernet port is technically called LAN, short for Local Area Network. The ethernet cable is called a Category 6 cable.