0
What is the difference between radial displacement and axial displacement?
Threadfin
Hey, the difference is quite clear! Radial is the distance between the two shaft axis and is quantified by measuring the radial distance between the centerline of one shaft if it were to be extended to overlap the other, but
Axial misalignment is the variation in axial distance between the shafts of the driving and driven machinery.
Good luck honey...
Wiki User
∙ 12y ago
Wiki User
∙ 9y agoThe difference is in the lead positions. Radial lead caps have both leads out the bottom. Axial lead caps lay on their side and have one lead on each end.
It's just the way the two leads are connected to the capacitor. Axial leads are connected along the axis of a cylindrical capacitor, while radial leads are connected radially, meeting at a point in the centre of the disc.
Wiki User
∙ 15y agoRadial displacement is generally reffered to the displacement occurred along circumferrence whereas Axial displacement occurs along the shaft axes on which disc is attached through hub. e.g- gear on shaft. Axial displacementis always at right angle to Radial displacement. Radial displacement is generally reffered to the displacement occurred along circumferrence whereas Axial displacement occurs along the shaft axes on which disc is attached through hub. e.g- gear on shaft. Axial displacementis always at right angle to Radial displacement.
Wiki User
∙ 11y agoAxial forces are a pure compression or tension force that are applied through the member axes. Radial force , acts perpendicular to the member axes. Eg. shear force and bending moment
Add your answer:
Earn +20 pts
Major difference between thrust radial bearing?
thrust bearing takes axial loads radial bearing takes radial loads axis is line about which races or ring rotate
What is the difference between axial fans and propeller fans?
Axial fans are divided into three groups: propeller, tubeaxial and vaneaxial. Hence, every propeller fan is an axial fan but the opposite is incorrect.
What is the difference between axial force and shear force?
Axial Force is the y direction. Shear Force is the x direction. Axial force is either in compression or tension, hence compressive and tensile. Shear force is like a splice it cuts right through the object.
What is the difference between axial and radial icp-oes torch?
The torch stays the same but how the spectrometer reads the emission data is changed. Axially is when the system looks down at the central channel of the plasma. Radially is when it looks at a slit or a slice of the plasme from the side. Most ICP read radially, but axially is used for more of a ppb range.
Axial load in impeller?
The load of Axial on an impeller or a rotor depends on various factors including suction force, the configuration of object, and variation of pressure difference in different stages.
What is the difference between axial bearing and radial bearing?
In axial bearing the most power force in the same direction as the axis of the shaft In radial bearing no.
Difference between electrolytic axial and radial capacitors?
Difrence is between lead positions. Axial one is -[]- and Radial =[] Axial ones are mutch pricier, but they are good choice for poin to point construction and low profile pcb's.
What is the difference between axial load and radial load?
Axial load (or thrust load) is a force applied parallel to the longitudinal axis, whereas, a radial load is a force applied transverse to this longitudinal axis.
Major difference between thrust radial bearing?
thrust bearing takes axial loads radial bearing takes radial loads axis is line about which races or ring rotate
What is difference between radial flow turbine and axial flow turbine?
in a radial flow turbine the steam enters the turbine in the direction of its radius and leaves it in the direction of the axis of the shaft. in a axial flow turbine the steam enters the turbine in the direction of the axis of the shaft and leaves the turbine in the same direction.
What is meant by axial displacement in steam turbine?
Axial displacement is the motion along the shaft of the turbine caused by the force exerted by the steam or by the thermal expansion of the shaft and casing.
What is difference between axial piston pumps and vane pumps?
An axial piston pump is a positive displacement pump that has a number of pistons in a circular array within a cylinder block. It can be used as a stand-alone pump, a hydraulic motor or an automotive air conditioning compressor.A radial piston pump is a form of hydraulic pump. The working pistons extend in a radial direction symmetrically around the drive shaft, in contrast to the axial piston pump.
What is the difference between E and nu in engineering geology?
E is generally taken to be the elastic constant known as Young's modulus which describes the relationship between axial stress and axial strain where Hooke's law still applies (i.e. linear elasticity). Nu is Poisson's ratio which is the relationship between axial strain and radial or transverse strain. For more information, please see the related link.
What loading are front wheel bearings subjected to?
radial and axial
What is the different between axial turbocharger and radial turbocharger?
An axial compressor uses many stages of "fans" with stators to compress air in the same direction as its original flow. An example of this is that of *most* turbojet engines' compressors. A radial (or centrifugal) compressor works at right angles to the airflow's original direction. An example of a radial compressor is the compressor on an automotive turbocharger.
What is the difference in working between axial flow pumps and mixed flow pumps?
In axial flow pumps, fluid enters and exits along the same direction parallel to the rotating shaft giving high flow rates and low head. In radial flow pumps, fluid enters and leaves perpendicular to the rotating shaft giving high head and low flow rates. Thus, in mixed we have combined of both axial and radial.i.e.Liquid will go behind the impeller at certain angle between 0-90degrees normally below 45degree.Mixed flow replace axial when we require head not provided by the axial pump as we have to lift water from a water a lower level and then discharge it. physically,mixed flow can be identified by bellmouth(diverging converging shape) which shows its between axial and radial. BILAL BIN NASIR
Can a radial capacitor react different than an axial capacitor when being used as a filter for EMF?
Yes. The inductance of a radial capacitor can be different than an axial capacitor, particularly at RF, so the reaction as a filter for EMF could well be different.
