Cars & Vehicles

What is the difference between bench vise and machine vise?


Top Answer
User Avatar
Wiki User
2010-01-07 21:27:16
2010-01-07 21:27:16

A bench vise is used for general work for a typical home owner. A machinist vise is used for precision machine work not to be abused.


Related Questions

the bench vise was first used in egypt ... because the egyptains had no source of items as we have today so they invented the bench vise... so that's when the first bench vise was first made.

A milling vise is generally much heavier and more precisely made than a typical bench or drill press vise.

Stud bolts are the ones with no head, only the bolt itself you can fast'em with vise grips or with nuts. Machine bolts are the ones that you need a wrench to fast it(you put the wrench in the head).

A vise is a clamping device consisting of two jaws that are opened and closed either by screws or a lever. Its purpose is to a hold a piece in a fixed position and is mainly used in carpentry and metalwork. A bench vise is a type of vise that is attachable to benches or worktables.

John Adams Vice President Duh I have no idea what is meant by the above "Answer". If this any indication of the reliability of the answers found on this site, then abandon all hope all ye who enter here! There is no difference between "vise versa" and vice versa. "Vise versa" is a common misspelling of vice versa.

Physical change is homogeneous and vise versa for change (heterogenous)

A vise has 2 simple machines, a screw and a lever, but the main one is the screw.

A vise is a tool with two moveable and parallel jaws that hold an item in place while it is being worked on. It is controlled by a screw and a lever. In woodworking, the vise is normally attached to a bench and made of either wood or metal. In the field of engineering, the vise is known as a Metalworker's or Fitters vise and is normally made of iron.

Bench vise must be bolted to a bench securely to work properly. It has two jaws that can be cranked together to hold an object being worked on. Most often used in automotive, hobbies, craft work etc.

The engineered electrical resistance the higher the number the more resistance it can handle and vise versa.

A sawing block is just like a bench hook. You either clamp it in a vise (make sure it is tight). The purpose of a sawing block is to avoid cutting your bench top with a saw.

Yes the only difference between the controllers is the colour and the controllers will work vise-versa

isometric view the lines in the axis are parallel dont converge. oblique view is vise versa of isometric view.

The purpose of an engineering vise to clamp and hold an object in order to work with it. Most vises are permanently mounted on a work table.

A vertical angle runs up and down or from top to bottom or vise versa. A horizontal angle runs from left to right or vice versa.

Lift the blade guard, sandwich the blade with two 3/4" blocks of wood and insert sandwiched blade in a bench vise (if not available, use a "c" clamp). Tighten vise (or "c" clamp), remove arbor bolt.

vise preservative. Table. columns. The axis. statement. pressure lever forces. gear box.

A vise tightens things.

Over driven blowers are geared to spin higher rpm then the motors actual rpm. Vise versa for Under driven.

Vice is the homophone for vise.

The Vise was created in 1954.

I would recommend Black and Decker. Their Workmate 425 Portable Project Center and Vise, can handle the weight and they always have great warranties on their products.

Review: overview of something, after reading/watching/etc. something, you can review it Preview: before reading/watching/etc. something, you get a glimpse of what it is. Sometimes, a preview is a review (and vise versa)

A type of locking wrench made by Vise Grip.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.