answersLogoWhite

0


Best Answer

The difference is that geysers are way much hotter than the steam from hot springs. The geysers can give you 3rd degree burns. But so can the steam from hot springs if you're in there to long.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

12y ago

turbine is driven, engine drives. in reality nothing, both use steam pressure to create a desired output. motion, turbine has 1 moving part that spins on it's axis. engine has many moving parts spinning an axis (crankshaft)

I really feel there is a huge difference in the way the two power generating sources work. The turbine uses steam at higher pressures and in my view less efficently than a closed piston power source does. lower pressures can be used in the closed piston type engine and levels of output can be changed by simply adding more cylinders or expanding the diameter of the piston,there are more moving parts than a turbine but if you figure in the steam adjust valves probally not that many more. I have never understood why an turbine is used as opposed to closed piston type engine. Thank you.

_____________________________________________________________________

A turbine opperates in a way similar to either a jet engine, or an old water-wheel. In either case, a steam turbine converst the thermal energy of the steam to rotary mechanical energy much more efficiently.

An engine (either a single set like a locomotive, or a block like a gas or diesel engine) uses both the pressure and the expansive poer of the steam to move a piston. The piston is connected to a rod which connects the backand forth motion of the piston to the rotary motion of the crankshaft.

A turbine is most fuel efficient in situations where full power is used most often, such as a powerplant, where the tubine spins a generator.

An engine is most efficient in low-speed, high torque applications, such as a pisotn set coupled to the drive wheels of an old steam locomotive.

The steam produced for a steam engine drives a piston up and down or left to right, while the steam produced for a steam turbine turns the turbine itself.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

The steam turbine is that turbine which can opreat with steam and the water turbine is that turbine which can opearat with water but the main difference between each other that is the difference of construction and matiel of turbine

This answer is:
User Avatar

User Avatar

Wiki User

16y ago

A steam boiler a heating unit designed to heat by boiling water, producing steam, and circulating it to radiators or steam baseboard units throughout the home.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the difference between steam turbine and water turbine?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the difference between a pressurized water reactor and a boiling water reactor?

The primary difference between a pressurized water reactor (PWR) and a boiling water reactor (BWR) is that in the BWR, water is actually boiled, and the steam is used to drive a steam turbine, while in the PWR, the primary coolant is not allowed to boil, but is circulated in a closed loop to boil water in a steam generator. The BWR circulates primary coolant through the steam turbine in a closed loop. The PWR contains the primary coolant in a loop that includes the steam generator, and not the steam turbine.


What is the difference between back pressure and absolute pressure in steam turbine?

Back pressure is the small amount of vacuum that is created when the used steam condenses from the turbine back into re-usable water.


How superheating of steam improves the efficiency of thermal power plant?

The amount of energy transferred from the steam is a function of the temperature difference between the input and output of the turbine. Also, superheating the steam ensures that there are no water molecules that can damage the turbine blades.


What is the difference between water and steam?

water is a liquid, steam is a gas


How does steam turbine works?

Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity


How a generator operated by boiler?

The boiler heats water into steam. The steam is pressurized and fed into a turbine which causes it to rotate. As the steam turbine rotates, the connected generator rotates and produces electricity. Make Sense??? Please 'Recommend Contributor'


What the difference between extraction and bleeding in steam turbine?

bleed is amount of steam output from turbine through pipe and exit from final stage of turbine . this bleed enter to feed water heater (low and high) and deaereator to increase unit efficiency or rather bleed is the amount of steam drained out of the steam turbine during the expansion of steam and this rejected heat energy is used to heat the feed water supplied to the boiler...........


Does electricity is made by water?

You use flowing water to turn a turbine. Or you heat water and turn it into steam which is used to turn a turbine.You use flowing water to turn a turbine. Or you heat water and turn it into steam which is used to turn a turbine.


How do close formula feeds differ from open formula feeds?

The feed system cycles between boiler and turbine and enables the steam to return to the boiler as feed water. A closed feed cycles a main propulsion steam run turbine through a high pressure water tube boiler. The condenser, set to a high vacuum, will receive the steam turbine exhaust.


How do close formula feeds differ from open feeds?

The feed system cycles between boiler and turbine and enables the steam to return to the boiler as feed water. A closed feed cycles a main propulsion steam run turbine through a high pressure water tube boiler. The condenser, set to a high vacuum, will receive the steam turbine exhaust.


What is a kind of engine that uses water steam or heat that starts with tur?

The word is "turbine".


The gross head in turbine installation is difference of level between?

it is difference between the water level from head race and tail race