The Radius
The radius is from the centre to the rim of a circle.
No, it is the outer edge of the circle; the rim; the perimeter
In the center, behind the rim.
The formula for the circumference of a circle = 2πr. Where r is the radius and thus the length of a spoke. When 42 = 2πr then r = 42 ÷ 2π = 6.6845 inches. The length of each spoke is 6.6845 inches (4dp).
Depends, changing the rim size will affect it, but if the aspect ratio of the tire is smaller on the bigger rim it could be the same. The distance from the center of the tire to the outside tread, if this changes, it changes the revaluations of the rotor. R- just stands for radial.
The radius is from the centre to the rim of a circle.
The width of a circle is called the diameter. The distance from the centre to the edge is called the radius and the distance around the rim is called the circumference
The radius of a circle is the distance from the centre to the rim. The diameter is the distance fron rim to rim passing through the centre point. It therefore follows that the radius is half the diameter
The wheel rim!
The center of a tire is called the rim, its what holds the air inside and the car standing ;D
The circumference is the distance around. The diameter is the distance across. The radius is half the diameter, from the center to the rim.
The center of the rim for a vehicle tire is called the hub. The hub is where the grease and bearings are that help the wheel turn.
There is a center fire and a rim fire.
Diameter, don't confuse it with the radius which is the line that goes from centre to rim.
I don't know what you mean by 'off set' but do not use any rims that change the stock distance from center of rim to wheel bearing, the load is carried in such a way moving he rim out will destroy your wheel bearings
The area of Fossil Rim Wildlife Center is 6,879,655.91808 square meters.
Take a piece of paper and a pencil and lightly trace the lugs on the wheel. this will give you the pattern. Then you can go to another rim and see if it matches the holes in the rim you want to put on. Charcoal also works with this method. A second option is to measure the distance from the center of one lug nut to the center of another lug nut. If you measure the same on the rim you want to put on it and the distance is any less or greater, it will not fit.