If you have a low spot that you could put the end of a hose, than you could hook a hose to the other end and feed it water to get the flow started. After getting the water running, hold the connected ends under the water in the pool and take them apart. Keep the end from the hose going to the low spot under the water. Have something handy to put on the end in the pool to hold it down to the bottom. If there is no are leaks in the hose and you keep the end under water, it should mostly drain the pool.
The discharge end of the hose must be lower than the intake end. When the level of water in the pool falls to the same level as the discharge end, the siphon will stop flowing. To drain a pool completely, the discharge end must be lower than the lowest spot in the pool and the intake end must be place at that spot. To start the siphon you can immerse the hose completely in water to get all the air out, plug the discharge end of the hose with your thumb or a suitable cap as you drag it over the side of the pool, and uncap it when the discharge end is at a low point. This method of starting a siphon avoids sucking or inhaling on the hose end, with the attendant risk of aspirating contaminated water into one's lungs.
The easiest way will be by siphon or hose out a window or into the tub.
siphon It out with a cut garden hose..
The best, fastest and easiest way is to let the pump siphon it for you directly from the big tanks. Go to your local gas station and pay, then the pump will do all the work for you. :-)
You definitely do not want to do it as our fathers and grandfathers did--using a garden hose, sucking it and then quickly releasing the hose. That led to lung damage and other health issues.
siphon
Not possible without dropping gas tank and draining it that way.
You can buy a hosebib vaccuum breaker that screws right on to the hosebib:-)
I really don't know but if I needed an answer quick,I would take the garden hose and check it out.
A common reason for his problem is that the diaphragm is worn and not lifting enough to create a siphoning action. The easiest way to fix this is to drain as much water as possible around the siphon, and then either replace the siphon or take it off and replace just the diaphragm.
You can not. There is an anti-siphon valve in the filler neck.You can not. There is an anti-siphon valve in the filler neck.
a Siphon kills victims to survive or he/she live forever
There is an anti-siphon valve in the filler neck. You can not siphon.