Timing and Firing Orders
Ford Ranger
Ford Ranger XL

What is the firing order of a 93 Ford Ranger 4 cylinder 23L and how are the cylinders numbered on the block and where would the 1 plug wire be located on the distributor cap?

192021

Top Answer
User Avatar
Wiki User
Answered
2007-04-29 22:54:25
2007-04-29 22:54:25

23L 4cylinder motors dont have distributors the cylinders on the block are numbered (front to back) 1234 and the firing order is 1-3-2-4 Correct Firing Order: Correct firing order is 1-3-4-2; Haynes Manual #36071, 1993-2005 Ford Ranger Pick-ups

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Bank 1 is the odd numbered cylinders. Cylinder 1 is closest to front of engine which is where the serpentine belt is

The four cylinder engines do not have a distributor. On the six cylinder it is located on the driver side end of the rear cylinder head.

Firing order is: 1-6-5-4-3-2 Cylinders are located as such: Standing at the front of the vehicle looking at the engine the bank of cylinders on the front of the engine are numbered from left to right 1-3-5 The rear bank of cylinders are numbered from left to right 2-4-6

Cylinder 1 is located in Cylinder Bank One. A V6 or V8 will have 2 banks of cylinders. A 4 cylinder only has 1 bank of cylinders.

It is on the valve cover on a four cylinder. It is inside the distributor on the six cylinder. You have to by a distributor to replace it.

The spark plug firing order is 1 - 4 - 2 - 5 - 3 - 6 The distributor rotor turns CLOCKWISE The marked # 1 position on the distributor cap faces to the rear and slightly towards the passenger side The engine cylinders / spark plugs are numbered : firewall 3 - 6 2 - 5 1 - 4 front

The cylinder position sensor is located in the distributor.

The cylinders are numbered 1-4 from front to back so number 4 will be the closest one to the transmission.

Firing order is 1-3-2-4. Distributor rotates counterclockwise. Standing in front of the car looking at the engine the cylinders are numbered from right to left 1-2-3-4. There is a #1 cylinder mark on the distributor. This year Accord came with two different distributors. One was a distributor that was bolted on. The #1 cylinder mark is located on top next to the # 1 plug wire location. It has a 1 plainly stamped into the cap. The other distributor snaps on with snap type connectors. You will find the #1 listed on the side of the distributor under the # 1 plug wire location.

On the 2.5 L it is on the end of the rear cylinder head.The 2.4L does not have a distributor.On the 2.5 L it is on the end of the rear cylinder head.The 2.4L does not have a distributor.

The spark plug firing order is ( 1 - 4 - 2 - 5 - 3 - 6 ) --------------------------------------------------------------------- The engine cylinders are numbered : passenger side , front to rear , 1 , 2 , 3 drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------------------ The marked # 1 position on the distributor cap is installed facing towards the firewall , and slightly towards passenger side -------------------------------------------------------------------------- The distributor rotor turns CLOCKWISE

Four cylinder, on top of the valve cover. Six cylinder, it is built inside the distributor.Four cylinder, on top of the valve cover. Six cylinder, it is built inside the distributor.

Wheel cylinders are in the rear drum brake between the shoes. The Engine's cylinders are in the engine block, under the cylinder head.

firing order for a 2.8 liter v6 sonoma is 1,2,3,4,5,6. The number one cylinder is located on the passengers side closest to the cooling fan. The cylinders are numbered as follows: left side is 1,3,5. right side is 2,4,6. On the distributor cap, the number one position is located at the 7 o'clock position and it rotates clockwise.

firing order is 1-4-2-5-3-6. Cylinder #1 is located on the front left of the engine block; the cylinders on the left are numbered 1-2-3 on the left and 4-5-6 starting from the front right side of the engine. ( standing at the front of the vehicle looking into the engine compartment )

4 cylinder it is on the end of the head. 6 cylinder it is in the distributor.

The distributor is located on the rear of the engine next to the firewall on a 2.0 4 cylinder.

This is a far reaching question that needs more clarification. There are cylinders where the pistons are located. If you have a clutch then you have a clutch master and slave cylinder. On the brakes you have a master cylinder and wheel cylinders. And the beat goes on. You need to distinguish as to which cylinder you are referring.

I believe it is located within the distributor. I am not sure if it is a seperate part or part of the entire distributor assembly. Hope this helps.

The Sensor that is located after cat. converter on side of engine with evenly numbered cylinders.

# 4 cylinder is the cylinder nearest the firewall on the passenger side of the engine The engine cylinders are numbered 1 , 2 , 3 , 4 from front to rear on the passenger side of the engine and 5 , 6 , 7 , 8 from front to rear on the drivers side of the engine

On a 4 cylinder it is on the driver side end of the head. On a V6, it is in the distributor. Only available with the distributor.

According to about.com it doesn't have a distributor , it has 3 coil packs

Four cylinder, it is on top of the valve cover. Six cylinder, it is inside the distributor.

Cylinders are numbered as such:Passenger side front to rear 1-2-3-4Driver's side front to rear 5-6-7-8So, # 4 is located on the passenger side, next to the firewall.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.