V = 0.25 * pi * (diameter^2) * height
For your numbers this works out to be 9.425 ft^3 (cubic feet).
Subtract the area of the I.D. of the pipe from the O.D. and multiply the result by the length. (I.D. and O.D. are inside and outside diameter respectively)
The volume of a right circular cylinder is pi r2 h. The volume displaced by the 20mm piston is pi 102 200, or 62831.8. The volume displaced by the 100mm piston must be the same, so solve for h in pi 502 h = 62831.8, or h = 8mm.
Take 550mm divide it by 2 to get the radius. Square the value of the radius. Muiltiply that value with 960 and 3.14. You now have your volume of the cylinder in mm. To convert from mm to cm. Divide the value you got by 10. Volume of any cylinder = (Pi) x (radius)^2 x (height).
The performance of a pneumatic system is dependent upon the air displaced or handled, which is directly proportional to the stroke and diameter. In other words, it is to be considered like a cylinder whose volume increases with diameter and length.
Simply find the length of pipe that makes the bend and the look up the volume in a place like Crane's Technical Paper No. 410. To find the length of the pipe, use the formula S=R(theta) with R being the radius to the center of the pipe and theta, the angle of the bend (in radians). S will be the length in the same units as R. Thanks, Michael
The diameter, alone, is not enough to find the volume of a cylinder. You need the height as well. > Where pi = 3.1416, and d = cylinder diameter cylinder volume = pi * (d/2)2 * length of cylinder
By inserting the data you know into the formula for the volume of a cylinder, and solving the resulting equation for the quantity you don't know - in this case, for the height. The formula for the volume of a cylinder is: volume = pi x radius2 x length. The radius is half the diameter.
Volume in cubic units = pi*(diameter/2)2*height
The volume is 17,671,500 mm3
The volume of a glass cylinder with an inside diameter of 6.0 cm and height of 28 cm is 791.68 cubic cm.
You can use the formula for the volume of a cylinder to calculate that.
The formula for the Volume of a cylinder is Pi*Radian2*Height=Volume. Therefore V=3.14*112*18=6842 ft3
The volume of a cylinder that is 30mm in diameter and 700mm high is 494,800.84mm3
It's unclear what the units of the inside diameter are, inches or feet (or even some other unit), but the formula is V = [Pi]r2h, where both r and h must be in the same units. Note that the radius, r, is one half the diameter.
Diameter = 2 * square root of {(volume / (pi * Height))} or in symbols d= 2 * (v/(pi * h))^1/2
The formula for the volume of a cylinder is Pi x d x h. Where Pi is 3.14, d is the diameter and h is the height.
The formula to find the volume of a cylinder is Pi x D x H. In this case 3.14 x 14 x 18