answersLogoWhite
Powerboats
Boats and Watercraft
Watercraft Engine Maintenance

What is the fueloil ratio for a 1973 65hp mercury outboard motor?

111213

Top Answer
User Avatar
Wiki User
Answered
2008-04-22 04:15:48
2008-04-22 04:15:48

My 75 Johnson is 50:1. If you use a synthetic oil you won't need to worry about it and no more smoke from too much oil

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions



A 175hp Mercury outboard requires a 50:1 fuel to oil ratio.


My 2003 3.3hp outboard motor is 50:1 mixture.



The 1996 model, 15 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


The 1977 model, 20 hp Mercury outboard, requires a 50:1 fuel to oil ratio.


The ratio on a 2003 is 50:1 and should be the same for the 2001


The 20 hp Mercury outboard requires a 50:1 ratio, roughly one pint of 2 cycle oil, to six gallons of fuel.


The fuel oil ratio for a 140 hp Mariner outboard motor is 50:1. Mariner is a brand of the Mercury Marine company.


An 1985 model, 25 hp Mercury outboard requires a 50:1 fuel, to 2 cycle oil ratio.


The 1975 model, 7.5 hp Mercury outboard, requires a 50:1 ratio, roughly one pint of 2 cycle oil, to six gallons of fuel.


The 1979 - 1980 model, 115 hp Mercury outboard, requires a 50:1 ratio. One pint of 2 cycle oil, to six gallons of fuel.


Mercury outboards prior to 1966 use a 24:1 fuel to oil ratio.


The 850 model, 85 hp Mercury outboard, is a 2 stroke engine requiring a 50:1 fuel to oil ratio.


The 120 hp, Force / Mercury outboard, requires a 50:1 ratio, one pint of 2 cycle oil to six gallons of fuel.


The fuel to oil ratio for a 1984 model, 50 hp Mercury outboard is 50:1. This is roughly one pint of 2 cycle oil, to six gallons of fuel.


The 1978 model, 75 hp Mercury outboard, requires a 50:1 ratio, roughly one pint of 2 cycle oil, to six gallons of fuel.


depends on the year, probably 50:1, if its an old motor, it might be 25:1


Mercury outboards, 1966 and up, require a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


The fuel to oil ratio for a 9hp Mercury outboard is 50:1, roughly one pint of 2 cycle oil, to six gallons of fuel.


The 1985 model, 70hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


The gas to oil ratio is 50 to 1 50: 1 I have the same motor, good luck


it is recommended for all fuel oil mix to be 50:1


The 110 model, 9.8 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil to six gallons of fuel.


If manufactured after 1965, an 80 hp Mercury outboard requires a 50:1 fuel, to 2 cycle oil ratio.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.