Want this question answered?
The Honda had bolt tightening sequence begins with the head bolts on each end of the head. Tighten the head bolts moving to the center, alternating from and to end.
Pls let me know the cylinder head bolt tightening sequence for toyota cressida mx83
The cylinder had bolt tightening sequence should begin by tightening the head bolts on each end of the head. Tighten the center head bolts. Work towards each end of the head, alternating back and forth.
45,65,65 ft lbs then 90 degrees.
head bolt sequence Toyota tercel
The tightening sequence for the head bolts on a Peugeot 106 1.1 is to begin at 1 and of the head. Move to the opposite end of the head. Alternate back in forth until you reached the middle.
No such thing, just remove them. However there is a sequence to tightening them.
It is important to know the head bolt tightening sequence and the torque of a vehicle. For the Fiat Punto it is 20nm, 30nm, 90 degree turn, 90 degree turn, then in order 8,6,2,5,10,7,3,1,4,9.
Begin by tightening the head bolts on each corner of the head. Next, tighten the center head bolts. Tighten the bolts on each end of the head and move towards the center.
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
20nm +180 degree +180 degree
get specs from your local librarys technical isle look up specs and tightening sequence.