Chevy Silverado
1982-1994 Chevy Cavaliers
1995-2005 Chevy Cavaliers

What is the lug nut torque for a 1993 Chevy cavalier?


Top Answer
User Avatar
Wiki User
2009-12-27 16:38:45
2009-12-27 16:38:45

My book says 100 lbft.

User Avatar

Related Questions

The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.

The torque spec for lug nuts on a Chevy Impala range from 45 to 65 foot pounds depending on the model year. Each lug nut must be torqued in a cross pattern to ensure even pressure.

it is a four bolt square pattern.

how much touque on z24 wheel nuts

185 to 260 ft lbs this is the front center nut that holds axle and front wheel bearing together not wheel lug nuts

80-90 ft lbs of torque on the wheels (lug nuts)

the torque specs for the Chevy is 100 lbs...pretty much standard for all Chevy cars and small pick up trucks... you silverados torque at 140 lbs

it will fit the b2200, b2000,b2600. I think 1987 to 1993.

The lug nut torque specs on a 2006 Chevy Malibu is 100 foot pounds. Although that is the factory setting, most service tire shops will tighten to the universal specifications of 90 foot pounds.

If you are asking about wheel lug nuts, it is 100 lb/ft.

2012-14 Chevrolet Orlando lug nut torque spec is 100 ft lbs.

The torque for the lug nuts on a cat backhoe 426c depend on what size the lug nuts are; for 1/2 lug nuts the torque should be around 80; for 9/16 lug nuts the torque should be around 140.

2000 ChevroletCavalierBolt Pattern: 5x100Center Bore: 70.3Hardware:12x1.50 LugOffset: 34-42mm

It is 140 ft. lb. trust me i work at a tire shop and torque this type of truck everyday

Haynes repair manual specifies 100 ft/lbs.

Torque on the lug nuts is 100 foot lbs.

Lug Nut (Bolt) Torque 110nm (80 ft-lbs)

what is the wheel lug nut torque for 2010 toyota highalnder

yes 3 of them hold on the factory hubcaps same on my 96 sunfire

140 ft./lbs. Source:

Rule of thumb is 90 foot pounds on passenger cars

There are a couple of different tools that are good for tightening lug nuts. A torque wrench and a lug wrench are good for tightening lug nuts. Typically lug nuts would be tightened with a torque wrench, but a lug wrench is much cheaper.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.