The Manufacturer specification lists the front rotors as 1.020" new, & 0.969" minimum (discard). A refinish minimum is 0.983"
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
Front Rotor Minimum Thickness after machining the rotor is .996
Minimum thickness is .8898 in.
The minimum thickness is cast into the rotor, either on the edge of the rotor or into the rotor hub.
no
22mm is the minimum rotor thinckness for the front and 12mm for the rear's
What is the minimum rotor thickness of the front and rear brake rotors on an '03 VW Jetta TDI?
The minimum thickness number should be cast into the rotor.
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
how thick should a front rotor on a 2005 envoy be
It is important to have all the parts in a car in the best condition. The minimum front brake rotor thickness for this car is 21.4 millimeters or 0.843 inches.
Minimum thickness is stamped into the rotor. Use a wire brush to remove the rust buildup and you'll see the spec.