answersLogoWhite
Science
Electrical Troubleshooting

What is the percentage of the dynamic load compared to the dead load?

Be the first to answer!


Related Questions


dead load :a constant load on a structure (e.g:bridge) due to the wight of the supported structure it self


the dead load, the live load, the dynamic load,gravitational,and erosion


The dead load is the weight of the bridge itself. The live load is things like traffic, wind, rain, etc. The dynamic load are things like earthquakes, big gusts of wind, and other things.


In bridge construction dead load, live load, and dynamic load must be considered. Dead load is the weight of the bridge itself. Live load is the moving weight on the bridge. Dynamic load comes from outside forces like wind and vibrations.


The difference between static load testing and dynamic load testing is that with static load testing a certain percentage of a product is tested against a group of specifications. During dynamic testing each individual product is tested against a group of standards based on previous tests.


a static system is that which is not in physical motion....e.g dead load or bridges a dynamic system is that which involve motion with respect to time.failure of any system caused by dynamic load.....e.g moving car or any system


A static load is the effect of gravity on an object or structure.A dynamic load is the forces that move or change when acting on a structure.Example of a dynamic load:Force of wind or the weight of a truckExample of a static load:Weight of a bridge


A dynamic load is when the crane is a shock load or a load that is moving making the weight greater, and a static load is a load that is not moving.


any load which is nostatic, such as wind load or moving lie load


They can be concentrated or distributed, under static (non changing) or dynamic loading.As per origin:Dead loadLive loadWind loadSeismic loadSnow fall loadRain fall loadHydro-static loadEarth pressureTemperature and shrinkage load


The definiton of static load is to load something staticly. However, the definition of a dynamic load can be either that of a large load of something or to have something of great importance be placed onto someone in such a way that it is a "load".


A static load varies slowly, a dynamic load changes with time pretty fast. In order for one to find the answer to this type of structural dynamic question, one might ask the help of a scientist.


a dynamic load is one that varies with time, sucha sproduced in road trandsportation. It could be amplified at resonance. An impact load is a dynamic load opf short duration, such as dropping a rock onto a surface, resulting in possible high acceleration depending on the stiffness.


A static load is applied to remain static without any build up of energy. Example a sandbag put slowly on a floor. When the sandbag put on a cart and wheeled on the floor, it becomes a dynamic load. When a sandbag is brought to a height and dropped down to the floor, it build on kinetic energy and is no longer a static load but a type of dynamic load.


stress is the ratio between the load and area


The load which is not varying w.r.t time i.e fix load is known as static whereas the load whose magnitude changes arbitrarily e.g you switch on the light, switch off the light so the load of your home varies as you turn on it or off, so this is what known as dynamic load.


A dynamic load arises from the acceleration or deceleration of a "static" load (mass). A shock load occurs when this acceleration or deceleration is very large and the the time frame is very short.


Because a live load can be self-ambulatory. A dead load will always require transport.


Dynamic Load The "load" is the total force and weight that a structure such as a bridge is designed to withstand. For a bridge, the total load includes the "dynamic" loads of traffic, people, wind, snow, and ice and the "static" load of the bridge's own weight.


Regulation of transformer means percentage reduction of transformer secondary voltage due to transformer loading as compared to its no load voltage.Another AnswerA transformer's voltage regulation is defined as 'the change in its secondary voltage, from no-load to full-load, at a specified power factor, expressed as a percentage of its full-load voltage, with the primary supply voltage held constant'.


Although it's counterintuitive, the saturated soil and vegetation are considered a dead load.



A dead load is the weight of the bridge or vehicle or building excluding the people or objects in it(An example is: If you were standing on a bridge all alone you would be the live load and the bridge itself would be the dead load)


dead load and live load dead load is the load of weight that is on the floor that is part of the construction of the house live load is the weight you add to it as in people furniture etc,


That isn't necessarily true. If the metal is under repeated dynamic loading, it becomes a matter of material fatigue and not strength. For instance, if you bend a paper clip back and forth repeatedly, it becomes easy to break. The material properties have changed (more brittle) due to the repeated dynamic load.In the case of impact or blast loading, it is actually the opposite. Materials often have the ability to withstand much larger loads than they could statically, but for very short durations (on the scale of milliseconds).because i said so.Dynamic load- Any load which is nonstatic, such as a wind load or a moving live load.Static Load - Any load, as on a structure, which does not change in magnitude or position with time



Copyright © 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.