nearly about 4.000 Omani rail
Need to know the wire size of the core conductors.
To answer this question the voltage of the unit must be given.
Single core has one single piece of metal wire, maybe copper or aluminium, with insulation around it. It is not very good if you want the cable to flex and bend as it is more likely to just bend and stay there in the new position. Multiple-strand cable has lots of thin wires and this makes it more flexible and likely to spring back
<strong><a href="http://www.beatsbybremonster.com">beats by dr dre</a></strong>
On the contrary, armouring is common on single-core conductors. Frequently, high-voltage underground cables are made up of three, individual, single-core, line conductors. These are most definitely armoured to protect them against penetration by the trench backfill and to protect workers who may accidentally hit them with tools.
You have to be specific. whether the conductor is aluminum or copper. Current carrying capacity will be different for these two types. Copper cable can take more load than aluminum cable for same diameter.
Need to know the wire size of the core conductors.
what is the current capacity 3 core 16sq mm swa
Coaxial Cable
cables.pretty much every cable is copper core with shielding of some sort.
I know two kind of machines for copper recycling. One is cable granulator which is used for making copper core into small granules by grinding cable and separating PVC. This is a ideal machine for miscellaneous cable. The other is copper wire stripper which is to strip the PVC cover and you get the entire copper core. This is widely used in various copper wire various diameters.
Coaxial cable has a center core of copper wire surrounded by a layer of insulation, which is in turn surrounded by a conductive braided shielding and encased in a final insulation sheath. The center copper core and the braided shielding layer act as two independent conductors, thus allowing two - way communications over a coaxial cable.
Four core armoured cable would be used in a circuit carrying 240 Volts 60 Hz AC that is installed in a location where it could get damaged, such as underground or under water. The 4 cores in the armoured cable would be used as the following conductors for the 240 V 60 Hz circuit: * "Red" hot (120V above Neutral)* "Black" Hot (120V below Neutral)* "Neutral"* "Ground" to protect the circuit, connected to the main incoming supply panel which feeds the circuit.
To answer this question the voltage of the unit must be given.
You can recycle cable by selling them to recycling centers or strip the insulation off with a tool like a wire cutter, a cable stripping machine etc. and sell the copper core in it.
Single core has one single piece of metal wire, maybe copper or aluminium, with insulation around it. It is not very good if you want the cable to flex and bend as it is more likely to just bend and stay there in the new position. Multiple-strand cable has lots of thin wires and this makes it more flexible and likely to spring back
<strong><a href="http://www.beatsbybremonster.com">beats by dr dre</a></strong>