Its a dealer code, transmission related. Take it to your dealer for professional diagnosis. just had it done dude it is the torque converter look up the code p1744 and it will tell u
how is the best way to remove water pump from 1997 mercury cougar 4.6 engine
On a 2001 Mercury Cougar : The radiator is located in the engine compartment , at the front of the vehicle
On a 1997 Mercury Cougar : The engine oil dipstick is on the drivers side of the engine ( for the 3.8 liter V6 and the 4.6 liter V8 )
No , not according to the Gates website ( they make timing belts etcetera ) The 2.0 liter four cylinder engine in a 1999 Mercury Cougar is NOT AN INTERFERENCE ENGINE
What year is your cougar and also is it a V6 or a V8? This information would be nice to know :) it is attached to the engine
The engine diagram for a 1999 Mercury Cougar is used in diagnosing and repairing problems. It gives the location of each component and its connection type.
According to the Gates website ( they make timing belts etcetera ) for the 2.0 litre four cylinder engine in a 1999 Mercury Cougar : ( No , it is NOT an interference engine )
1991 mercury cougar i need to know the egnition timing engine is a 3.8 v6.
The 3.8 liter V6 engine in a 1991 Mercury Cougar has a timing CHAIN
The Mercury Cougar is not a Sports Car. It is a muscle car if it has the high performance engine.
Is this a trick question , because there wasn't a 1998 model year for the Mercury Cougar The 1997 Mercury Cougar , with the 3.8 liter V6 engine , has a ( 18.0 US. gallon tank The 1999 Mercury Cougar , with the 2.5 liter V6 engine , has a ( 15.4 US. gallon tank )
the 99 mercury cougar inline 2.0L engine has 125 hp and 131 lbs/feet of torque the v6 cougar 2.5L engine has 170hp and ? lbs/feet of torque
The charging system is the alternator which is on and functioning anytime the engine is running. If not, then you have a problem with the alternator.
A 1994 Mercury Cougar is OBD I , EEC - IV ( there should be an EEC TEST connection in the engine compartment )
On a 1995 Mercury Cougar : The automatic transmission fluid level dipstick is in the engine compartment , near the firewall , towards the passenger side of the engine ( at the rear of the engine where the transmission is bolted to the engine )
No , according to the Gates website ( they make timing belts etcetera ) the 2.0 litre four cylinder engine in a 2001 Mercury Cougar is NOT an interference engine
On a 2001 Mercury Cougar : The Mass Air Flow Sensor is between the engine air filter and the big engine air intake tube
On a 1991 Mercury Cougar : The oil pump is INSIDE the oil pan ( the oil pan is bolted to the bottom of the engine )
The Mercury Cougar blower motor is located on the firewall in the engine compartment. The blower motor can be seen on the passenger side of the firewall.
A 1994 Mercury Cougar is ( OBD I , EEC IV ) There should be an EEC TEST connection in the engine compartment
With an OBD2 scan tool. The problem must be repaired or the light will just come back on.
Check and fix the engine.
According to the 2000 Mercury Cougar Owner Guide : With engine oil filter change : The 2.5 liter V6 engine takes ( 5.5 liters of 5W-30 engine oil )
The positive crankcase ventilation valve on a 2002 Mercury Cougar is located on top of the engine; in the valve cover. It removes harmful fumes from the engine.
the rear one ========================================================== On a 1995 Mercury Cougar , 4.6 liter V8 engine : ( Bank 2 ) is the drivers side of the engine