Starters and Ignition Systems
Chevy S-10
Chevy Trailblazer

What is the procedure for changing the ignition switch in a 2000 Chevy S10 truck?

678

Top Answer
User Avatar
Wiki User
Answered
2010-04-06 15:20:39
2010-04-06 15:20:39

Remove the dash trim around the gauge cluster and radio. It helps to put the shifter in 1st to get it out. Remove the upper and lower steering column covers. Disconnect the air bag(unhook the battery first). You'll have to remove the steering wheel to gain access to one of the bolts that holds the tumbler housing to the column. I think there are 3 in total, they are torx heads. Remove those bolts and the housing will come off.

If I misunderstood the question and all you want to replace is the plastic switch that is turned by the tumbler when the key is turned. You can get to that by just removing the plastic around the column. Below the key you will see the big wiring harness.(disconnect the battery) This piece can be pulled out of the bottom of the tumbler housing with a screw driver. Once it's out you will see what the tumbler actually is turning when you turn the key.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


How do i change the ignition switch in a 1988 Chevy camaro


how to replace an ignition switch for 2005 chevy equinox



Remove the retaining ring at the top of your 1985 Chevy ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.


Begin by removing the retaining ring at the top of your 1992 Chevy ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.


Remove the retaining ring from the top of your 1989 Chevy Corvette ignition switch. Slide the ignition switch out and remove the wiring harness.


You will need to remove the ignition switch retaining ring in your 2002 Chevy Astro Van. Slide the ignition switch out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.


Remove the retaining ring at the top of your 1994 Chevy Corsica ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.


Try changing the ignition switch located on the steering column


Remove the retaining ring from the top of your 1999 Chevy Cavalier ignition switch. Slide the ignition switch out and remove the wiring harness from the end of it.


You will need to remove the retaining ring from the top of your 1997 Chevy Camaro ignition switch. The ignition switch will slide out. Remove the wiring harness. Reverse the process to install the new ignition switch.


The 1966 Chevy Impala ignition switch can be removed by loosening the retaining ring at the top of the ignition switch. Remove the wiring harness. Reverse the process to install the new ignition switch.


how do you install new ignition switch on 1989 chevy G10 van?


Chevy Tahoe Ignition Key Starter Switch


i have a 06 Chevy cobalt and can't get the key out of the ignition switch


how do you remove the ignition switch on a 1990 chevy half ton pick-up?


You will need to remove the retaining ring at the top of your 1998 Chevy Lumina ignition switch. Slide the ignition switch out. Remove the wiring harness.


how to remove key stuck in ignition switch in Chevy colbalt


To bypass the ignition switch on a 1994 Chevy Astro, simply attach a wire to the ignition switch where it makes contact after the key is turned on. Run the wire to the push button and install at the lower part of the ignition switch to send power to the starter. Ê


IGNITION ? ARE we talking ignition coil-ignition wires ignition switch-key & tumbler.



Do a google search for Chevy Avalanche Fan Club of North America. Then search there. It's a site for basically any info on a Chevy Avalanche


stater ignitin switch 2008 chevy loction


Where can I download instructions for replacing the ignition switch tumbler on a 1984 chevy pickup?


The 1985 Chevrolet El Camino ignition switch can be removed by loosening the retaining ring at the top of the switch. The switch will slide out. Remove the wiring harness from the back of the ignition switch.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.