answersLogoWhite

0


Best Answer
Copy

Purchase a repair book from an auto parts store for the auto to be repaired. It will tell you all you need to know.

It also depends on what kinda of vehicle you want to do this on. On one particular vehicle the only way to get the oil pan off was to lift the engine (I'm not kiddin') and another one you had to take a part of the exhaust out of the way to get at it.... anyway, ya, other than the few pain in the butt ones, the rest ain't so hard.

1)drain the oil 2)remove the bolts 3) scrape away old gasket material or sealer from both surfaces (being careful not to scar them) 4) Clean the oil pan well (you don't want any extra junk in there when you put it back on. 5) Put on sealer/gasket 6)put bolts on 7) If you can find the proper tightening specifications, then go right ahead and do it, but if not, and you don't have some idea, then it's best to take it to a shop. Cork gaskets should be tightened to about 100 inch pounds (max 120, 100 being safe). I recommend using a torque wrench. It's best that you replace the oil filter too since the oil is already out and .... why not. :) I hope I could help :)

Priscilla =^.^=

User Avatar

Wiki User

โˆ™ 2015-07-17 17:33:29
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Add your answer:

Earn +5 pts
Q: What is the procedure to change the oil pan gasket?
Write your answer...
Submit

Related Questions

What is the procedure to change an oil pan gasket on a 1985 Buick rivieria?

Do I have to pull the motor to change the oil pan gasket on my 1985 buick rivieria?


How do you change the oil pan gasket on a 1998 camaro v6?

To change the oil pan gasket u need to raise the engine about a foot in order to get to the oil pan .


How much should it cost to change a oil pan gasket on a Ford Taurus?

The approximate cost to change an oil pan gasket, on your Ford Taurus, is $125. The oil pan gasket can be purchased for $10.


How do you change oil pan gasket on 2000 S-10?

You can change the oil pan gasket in your 2000 Chevrolet S 10 pickup truck by removing the oil pan bolts. Once the bolts are removed the oil pan will come off. Remove the old oil pan gasket and replace it with a new gasket.


How do you change the oil pan gasket on an 1993 Mazda 929?

drain the oil form the drain plug on the pan, then unbolt the pan, and change the gasket. Rebolt the pan and refill the oil. Good luck


How do you change oil pan gasket 1997 Ford thunder bird?

to change the gaket youl have to drain all the oil out and change your oil fluid filter and gasket the gasket is the seal between your pan and car take pan off drain clean and put new gasket on pan and put it back on.


How change oil pan gasket on 1997 grand am gt?

The oil pan gasket on a 1997 Pontiac Grand Am GT is changed by draining the oil, removing the oil pan bolts, and removing the pan. The old gasket is scraped away, a new gasket is placed on the pan, and it is bolted into place.


How do you change the oil pan gasket on a 2000 Chevy Impala?

Drain the oil from your 2000 Chevy Impala oil pan. Remove the oil pan retaining bolts. Remove the old oil pan gasket and clean the surface. Put the new oil pan gasket on and reverse the process.


How do you change oil pan gasket Honda Odyssey?

need to stop leak on 1995 Honda Odyssey on a oil pan gasket


How do you change oil pan gasket on a 98 aurora?

You will need to drain the oil from your 1998 Oldsmobile Aurora oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Put the new gasket on and reverse the process.


How do you change oil pan gasket on rodeo 2.6 1997?

drain the oil, drop the pan, remove old gasket, put new gasket in, reinstall pan, fill with oil......simplest job in the world......


How do you change the oil pan gasket on a 1998 Chevy lumina?

Drain the water from your 1998 Chevy Lumina oil pan. Remove the oil pan retaining bolts. Remove the old oil pan gasket and clean the surface. Put the new oil pan gasket on and reverse the process.


How do you change the oil pan gasket on 1995 Chrysler 3.5 engine?

A person can change the oil pan gasket on a 1995 Chrysler 3.5 engine by first draining the oil. The pan is then unbolted, the original gasket removed, and a new one put in place.


How do you change an Chevy Cobalt oil pan?

Drain the oil from your Chevy oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Put the new gasket on and reverse the process.


How do you change an oil pan?

Remove the pan, make sure that you have a new oil pan gasket or gasket maker. Before, installing the new gasket make sure that you clean the area of contact.


How do you change the oil pan gasket on a 1988 Toyota 4wheel drive pickup with a 4 cylinder engine?

You will need to drain the oil from your 1988 Toyota Pickup truck oil pan. Remove the oil pan by removing the oil pan retaining bolts. Scrape the old oil pan gasket off. Clean the oil pan gasket surface. Put the new oil pan gasket on and reverse the process.


What is procedure for oil pan gasket replacement on a 97 Saturn?

drain the oil from the vehicle, unbolt the oil pan, scrape old gasket from pan and crankcase. check the torque specifications for the oil pan bolts (shouldnt be very high). replace the gasket and oil pan to factory torque specs. put drain plug back in and fill with factory specs of oil.


What do you do if your oil pan gasket is leaking on a 1993 Geo prism?

First try snugging up the oil pan bolts but if that doesn't work you'll have to change the oil pan gasket.


How do you know if you need a new oil pan gasket?

You will need a new oil pan gasket when the oil pan gasket leaks. It is recommended that you use a new oil pan gasket every time you remove the oil pan.


How do you change the oil pan on a 2003 Chevy Malibu?

Drain the oil from your 2003 Chevy Malibu oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket. Put a new gasket on the new oil pan and reverse the process.


How do you change the oil pan gasket on 1995 Chrysler 3.5v6?

The oil pan gasket on a 1995 Chrysler 3.5 V6 engine is changed by draining the oil and removing the retaining bolts. The pan is then lowered, the gasket removed, and a new gasket put in place.


How do you change the oil pan on a 93 Chevy Lumina?

Drain the oil from your 1993 Chevy will oh my not oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Put the new oil pan gasket on and reverse the process.


How do you change oil pan gasket on rav4?

remove bolts


How to change Oil pan gasket on north star engine?

it is better if you get help from a technician for that job. * remove all the parts which obstruct the easy removal of the oil pan. * remove all the fasteners around the oil pan. * use the reverse procedure for the oil pan installation. * torque the bolts to the specification.


How much to change an oil pan gasket in BMW 525I?

I just got quoted $1,189 to replace the oil pan gasket on my 2006 BMW 525xi...