need torque specs for 3.4 pontiac grand am intake and rocker arms
what are the torque specs for lifters on a 2000 Pontiac grand am gt
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
The torque of the 1998 Pontiac Grand Prix is 220 ft.-lbs. at 4000 rpm. This remained the standard for all sixth generation models of this car.
2003 pontiac grand prix 3.1
i don't now
HEAD BOLT TORQUE For your 1999 PONTIAC GRAND AM: HEAD BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE SEQUENCE --------- | 6 2 3 7 | | 5 1 4 8 | --------- STEP 1: TORQUE IN SEQUENCE TO 33 FT/LBS STEP 2: TURN AN ADDITIONAL 90 DEGREES RECHECK FINAL TORQUE IN SEQUENCE *** CAUTION *** ENGINE USES TORQUE TO YIELD HEAD BOLTS (TTY) THAT PERMANENTLY STRETCH DURING THE INITIAL INSTALLATION. NEW HEAD BOLTS MUST BE USED WHEN CYLINDER HEAD IS REPLACED OR RE-INSTALLED TO OBTAIN PROPER TORQUE. ALWAYS COAT BOLT THREADS WITH THE PROPER SEALANT.
118 Foot Pounds
18 ft pounds
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
For the 1996 Pontiac Grand Am 3.1 liter 6-cylinder, the torque for the intake bolt is 10 ft/lbs. The torque for the rod bearing cap in step one is 15 ft/lbs, and in step two turn an additional 75 degrees.
wheel lug nuts 100 ft lbs according to our Haynes Manual for a 2003 Grand Am page 1-2 under torque specifications
The head bolt torque specifications, for your 2002 Pontiac Grand Prix, is 160 pounds per square inch. The head bolts should be torqued in 40 pound intervals.
225 / 50r 16
The intake manifold torque specs for the 3.1 L on a 2001 Pontiac Grand Prix is 195 ft lb. and 264 Nm at 4,000 rpm. It also has 175 hp at 5,200 rpm.
first get new head bolts. they are torque to yield. torque them to 37 ft-lbs and then rotate an additional 120 degrees.
195 fp n 205 for gt
the manuel reads 26psi to 36psi
It is attached to the valve body inside of the transmission.
Bell housing bolts and the torque converter bolts.
Yes it will fit rather nicely. Be careful, though, that you first incorporate the high impact jizm load indicator before tightening the rotational chaumfaxing resuscitator. If you remember to do it, changing doors will be a breeze.
Pontiac Grand Am was created in 1973.
THe Chiltons says "14lbs + 30 degrees"