Not exactly sure if this is the problem, but from my experience in the pool business I've seen purple build up on fiber glass pool's surface, and it seemed to be a combination of two or more of these conditions: low calcium, low ph, and well water
follow fuel lines to filter. remove lines from filter and fit lines to new filter.
trace fuel lines to filter, disconnect lines from filter, fit lines to new filter
separate the lines from the filter and fit the lines onto the new filter. just trace the fuel lines to find the filter
if you follow the gas tank lines there will be a clear peice of plastic and thats the fuel filter it will have an inlet and a outlite on ether end it dosent matter wich way u put it back on ether.
purple lines.
purple lines.
Depending on the year, the blazers fuel filter is most likely on the frame. While covering the connection with a rag, loosen the fuel lines from the filter. Remove the filter and replace, then reconnect the lines.
Remove the fuel lines from both Ann's of the fuel filter. The lines can be removed by loosening the clamps. Reverse the process to install the new fuel filter.
They are two different sizes and should be color coded
That's a negative result...
the meaning of lines to stand
You will need to jack up the RR corner of the vehicle to reach it. The fuel filter is fastened with a big clamp to the right side frame rail, close to the fuel tank, just ahead of the RR wheel. Use a small flat screwdriver to remove the two plastic clips from the lines attached to the filter. Be careful, the lines are under pressure, and there will be fuel that will spray out as you unplug the lines from the filter. Use a flat screwdriver to loosen the clamo from the body of the filter and then you can remove and replace the filter. Install the new plastic line clips that are in the box with the filter into the lines and then plug the lines onto the filter until you hear them click in place.