0
Bad spark plug Bad plug wire Bad valve Bad piston Do a compression test to see if problem is engine internal
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Will it hurt the engine to drive with a cylinder that is miss firing?
Yes.
Why does an engine miss?
A plug not firing for some reason. this may be do to bad wires, insulation cracks cause spark to jump from wire to wire, or wire to ground.
What are the signs of a bad lifter in a Camero?
Engine miss/running rough. Engine back firing / poping
Can car be driven with a code P0303?
P0303, number 3 cylinder is miss-firing. You could drive it but depending on the reason why it is miss-firing, it may damage the catalytic converter.
What is the reason of miss firing in a CNG engine whats the solution of this problem. why an engine does not take pickup while in CNG rather than petrol?
It might be due to pluges get it changed and for pickup you need lamda control system Micheal 9310584008
What is the troube if the engine misfire?
My http://wiki.answers.com/Q/FAQ/4339is miss firing. What's the solution ?
Can poor quality gasoline cause an engine to miss?
yes, it could have water in it ,or dirt that will plug the fuel system.
What would make a 1999 GMC suburban miss fire?
It could be a bad sparks plug or timing belt which would make it miss fire.If you do not have fire to the proper place in the engine, it will cause a miss fire due to the firing system of the engine.
You have changed the timing belt on your vectra b and the engine is miss firing?
sounds like your a tooth out on the belt , recheck the pins and marks.
1996 Chevy Tahoe recently tune up but still miss and loose power?
The most common reason for a engine to miss and lose power is a lack of fuel. A dirty fuel filter can cause an intermittent fuel supply to the engine.
What would make a 2003 ford windstar v6 engine miss after the plugs and wires have been changed?
Coil, module, injectors double check firing order on wires
What causes engine to miss other than plugs wires ect?
Check for hairline cracks (very hard to see) inside the distributor cap. This causes cross firing.
