The standard length of TMT (Thermo-Mechanically Treated) bars can vary depending on the country and the applicable standards. In general, TMT bars are commonly available in standard lengths ranging from 12 meters (39.37 feet) to 15 meters (49.21 feet).
However, it's important to note that TMT bars can also be custom-cut to specific lengths as per the requirements of a construction project. This allows for flexibility in adapting the bars to different structural designs and dimensions.
When using TMT bars for construction purposes, it is recommended to refer to the applicable local standards and consult with suppliers or manufacturers to determine the specific standard lengths available in your region.
its normally 12m.
Lap Length is the length overlap of two rebars tied to extend the reinforcement length. Lap Length of about 50 times the diameter of the bar is considered safe. Let us understand the term “lap length” with an example: suppose there is a need to build a 200ft tall structure, say column. We know that for convenience of transportation, standard length manufactured are upto 12 metre only, hence to strengthen the structure overlapping of two or more bars are done side by side upto the design length. Reason for doing so is the required tension forces that is needed to transferred from one bar to the other. So if diameter of tmt is A then lap length will be 50A. If both diameter is same. Now coming to question, lap length of tmt 550 grade is usually done where minimum bending stress is encountered. We at Shree Ji Steel offer wide range of sizes and grade for various product range which can be checked from our website Shree Ji Steel Corporation.
14m
0.62 kg/m is the unit weight of 10 mm dia, and you use the thumb rule for all other dia unit weight per metre = d*d/162 where- d is dia of bar/rod in mm
TMT steel bars are produce from Carbon steel material(BILLETs/,INGOTS)Finish steel bar coming out of finishing stage of rolling mill is passed through devise where it is being passed through high pressure water jets to give the steel bars desire quality's 500/550Kg per cms.squre
the density of TMT R/F steel is 7850
diameter square of the bar. Divided by 162. gives W/1m length
meaning of 500 D in TMT bar
40ft
Lap Length is the length overlap of two rebars tied to extend the reinforcement length. Lap Length of about 50 times the diameter of the bar is considered safe. Let us understand the term “lap length” with an example: suppose there is a need to build a 200ft tall structure, say column. We know that for convenience of transportation, standard length manufactured are upto 12 metre only, hence to strengthen the structure overlapping of two or more bars are done side by side upto the design length. Reason for doing so is the required tension forces that is needed to transferred from one bar to the other. So if diameter of tmt is A then lap length will be 50A. If both diameter is same. Now coming to question, lap length of tmt 550 grade is usually done where minimum bending stress is encountered. We at Shree Ji Steel offer wide range of sizes and grade for various product range which can be checked from our website Shree Ji Steel Corporation.
quenched and self temperedsame as TMT bars
14m
TMT bar oval weight Stand oval size in mm like 12mm size bar oval size-12*.8=9.6kg/m
Thermo mechanical tempered Reinforcing bar or Structural steel
This refers to the measurement of a standard bar stool which is 24 inches. Therefore it is talking about the measurement inches and about the typical bar stool length.
There is no standard length of a space bar. Keyboards come in many sizes and have different keys and layouts. The space bar is usually between 3 and 5 inches in length.
The length of the bar was never exactly measured in the first place. If you would measure several, you would see that they are not all the same length. That never was the purpose of making the bar. Weight is more important to the maker. They only want a certain amount in the bar no matter the length.