That address belongs to RoadRunner internet who is likely to be using complex network scopes, or even single addresses. Because of that the subnet mask is impossible to predict. IF (and I'm sure you're not) you were to address the entire Class B subnet, the available addresses would be 24.172.0.0 - 24.172.255.255 and THAT subnet would be 255.255.0.0
This is not the proper way to do research for your JCU package.
datagram subnet is connection oriented network.
A default subnet mask gives you classful addressing on octet boundaries. A non-default subnet mask implies that you are subnetting a larger network into several smaller ones.
255.0.0.0The default subnet mask of a class A network is 255.0.0.0
The IP Address 192.168.1.01 is for Internet Assigned Numbers Authority, a corporation who are based in Los Angeles. The numbers 255.255.0 are not part of the IP address; it is the subnet mask.
That is your subnet mask.
255.255.0.0Technically a Subnet is a network that is a part of a larger network. The Ip Address above has 3 Subnet numbers in it.108 is a sub-network under Network number 131while 16 is the network that is accessed by 131.108and finally 64 is the network find thru 131.108.16The last number is usually a single internet enabled machine, but can actually be a network that is located at the end users location. But the internet cannot individually address those machines and the user must implement some way for them to share it (IE, a local router with addressing enabled)numbers such as 192.196.0.0 and 10.10.0.1 are reserved for such local addressing schemes.The internet addressing scheme does not require subnets to be actually a physical subnet. This URL is translated into an actual address and visa versa by dedicated servers located on the internet.
An IP subnet calculator enables you to have the ability to calculate local IP configurations for your network. This network will be otherwise masked from the rest of the internet.
It depends on whether you are using a default subnet mask or you are subnetting the class B network. A default subnet mask would be 255.255.0.0, but if you are subnetting the last 2 octets in the subnet mask could be anything (up to 255 per octet).
To transmit packets of private subnet through public internet
An Internet Protocol, commonly called an IP these days is your internet's personal identity number. The Internet Protocol calculator is used for designing a subnet.
If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.
Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet mask.Gateway: A gateway is a network point that acts as an entrance to another network. On the Internet, a node or stopping point can be either a gateway node or a host (end-point) node. Both the computers of Internet users and the computers that serve pages to users are host nodes. The computers that control traffic within your company's network or at your local Internet service provider (ISP) are gateway nodes. Can transcode or allow different protocols to talk to each other.
What if your company is assigned a network address of 150.50.0.0 you need to create 4 subnets all having access to the internet what is the correct subnet mask for the network
A Subnet calculator is used for determining the attributes of an IP subnet including the start of it. Results of the subnet calculation include the access control lists, the subnet range and the subnet bitmap.
No. 192.168.12.1 - 192.168.12.254 is one subnet (assuming 255.255.255.0 subnet mask)
If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.
The default subnet would be 255.0.0.0 (class A)