Want this question answered?
Between 8 and 12 micron
IC 9-19-18 - Indiana does not have a legal tire depth law... Most states list 2/32 as the limit.
The IC code is on the actual IC, you can find out its details by searching the IC code on Google.
ic made from bjt is known as bipolar ic
op amp linear ic 7805 non linear ic
The letters "IC" pronounced properly can say "icy" meaning very cold.
Both IC 7805 & IC 7905 are voltage regulators, IC 7805 is Ic 78xx series while IC 7905 is Ic 79xx series with xx representing voltage output
naming of IC is done according to manufacturer's name, ic type and IC number. i think MC means motorola is manufacturer. 74 means TTL IC. It is 7408 IC and H means high
For an IC chip
4026
That's old-fashioned nomenclature, but that's okay - the "-ic" suffix means you're dealing with tin with a higher number of valence electrons, in this case, 4. So with tin as +4 and oxygen, as always, as -2, you're going to get a formula of SnO2. Tin with a charge of +2 is the other possible valence option, and that's called "stannous oxide" with the "-ous" suffix, and a formula of SnO. The better way to express stannic oxide is simply to say tin(IV) oxide, and stannous oxide as tin(II) oxide.
Bipolar transistor current gain is also called "Beta," or the h-parameter "hfe." beta = current_out / current_in The beta of a BJT is mostly determined by the thickness of the Base region, and by the excess doping in the Emitter relative to the Base. A thin Base and a heavily-doped Emitter leads to a high value for current gain. In a BJT, beta = Ic / Ib In a FET, beta is usually taken as infinity, since no current flows in or out of the gate. Beta is an impirical number. It means nothing unless the Ic is known or the load. It can have a beta from 1000 to 10 it all depends on the load.