first torque step is 84in-lbs...second torque step is 18 if you have small m8 studs or 23 for big m10 studs
72 to 87 ft lbs.
The Torque Spec and assuming you didn't change your rims, 72-87 ft. lbs Anyone who tells you 100, are ignorant.
“looking to see if the 72 VW I own is a Beetle or Super Beetle? VIN # 1122369336”
Torque settings: Phase 1. 29ft/lb or 39 Newton Meter 2. 54 73 3. 72 98
The cylinder head bolt torque specs for a Mitsubishi 2.0 or 2.6 is 65 to 72 ft. lbs. cold. Torque sequence is as follows.
first torque them in sequence to 29 ft lbs, then to 51 ft lbs, then to 72 ft lbs.
navagate me thru a 72 super beetle interior
The 5.0 head bolt torque is step 1- 55 to 65 ft. lbs. Step 2- 65 to 72 ft. lbs. The 6 cylinder is the same as the 5.0
65 foot pounds for re-used head bolts and 72 foot pounds for new head bolts.
yes
== 12-16 Foot pounds (Final torque) Note: to torque bolts & nuts, start in center using crisscross pattern working outward The Head Bolt Torque 65-72 Foot pounds (Final torque) Torque sequence ------------ front | 9 5 1 3 7 | of | 10 6 2 4 8 | engine ------------ Final torque must be reached in 3 equal steps Recheck final torque in sequence The Intake Bolt Torque 23-25 Foot pounds (Final torque) Torque bolts & nuts in numbered sequence --------------- | 5 1 9 11 3 7 | | 6 4 12 10 2 8 | --------------- The Main Bearing Cap Torque 60-70 Foot pounds (Final torque) The Main Bearing Cap Torque 60-70 Foot pounds (Final torque) The Rod Bearing Cap Torque 19-24 Foot pounds (Final torque)
You have to turn them twice. The first turn is 61 psi. The second turn is 72 psi.