what is the torque spec for a 2005 Pontiac G6 Gt brakes
THe Chiltons says "14lbs + 30 degrees"
You need to state the model type of the engine. Try asking at ' GrandAmOwnersClub.COM' as some Bonnevilles shared the same engine as the Grand Am in some of those years.
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
whats the torque spec for the pressure plate on a 1998 kia sportage?
30 foot-pounds of torque for each of the seven bolts
1.8 mazda etude 1998 con rod torque spec
caliber torque spec on a Toyota tacoma pre runner
the torque spec for what?
service manual, it could be found at library or bought at parts store.
The axle nut torque specifications for a 1998 Chevy 4x4 are 165 lb ft. The metric specs are 225 N m.
what is head bolt torque spec gm 3.1
the torque spec for a 1997 cr125 cylinder head is 20ft pounds of torque.
The first torque spec for Isuzu 2.6 exhaust manifold in 58 ft lb. It has a second torque spec which is 72 ft lb.
what the torque spec for the cylinder head on a 2003 saturn L300
The 1998 GMC Jimmy front axle shaft torque specification is 60 pounds. You want to make sure that you do not over torque the axle shaft, as you can ruin the axle bearing.
The torque specifications are actually determined by the bearing manufacturer. However 148 ft-lbs or 200 Nm seems to be the common spec.
rocker arm torque specs
The valve cover bolts need to be torqued to 72 to 84 IN-LBS
the hp for a stock 4g63 non turbo is 160 and tq is 140
torque spec on the oil drain plug on a 2.9 ford ranger?
the proper torque is 20 ft. lbs. the proper torque spec for a freesyle is 20 ft. lbs. That is what the factory calls for
Check the service manual for proper torque spec.
The 3 bolts on the hub are 65 foot pounds, and the axle nut is 165 foot pounds.
what is the Torque spec for rear axle hub nut on a 2002 ford explorer