Your question is best answered with" purchase a manual"! Reason being, looking for help with torque numbers also requires sequence. Without the proper sequence, you will destroy, at the very least, the head gasket. an inexpensive manual can be found at all patrts stores.
The 1999 Pontiac cylinder head gasket bolt torque specification is 160 pounds. The intake manifold bolt torque specification is 90 pounds.
What is the torque specifications for Madza T 3000 engine
The 4.3 liter Chevy Astro head gasket torque specification is 160 pounds. The head gasket bolts should be torqued in 40 pound intervals.
usually no more than 35 ft lbs with new gasket
no, use rtv sealant
The 60-horsepower VW engine has a torque specification of 115 pounds at 2000 RPMs. The engine will have 130 pounds of torque at 2500 RPMs.
The torque specification, for the harmonic balancer on your 350 cubic inch engine, is 280 pounds per square inch. The torque specification may vary according to the manufacturer of the engine.
3 ft. lbs.
The 1987 Kia 1.8 liter engine had bolt torque specification is 120 pounds. The camshaft bolt torque specification is 90 pounds.
The 2001 Mitsubishi Montero Sport 3.0 liter engine valve cover torque specification is 40 pounds. You do not want to over torque the valve cover bolts, as you may ruin the valve cover gasket.
The 1995 Toyota 3.0 liter engine main bearing torque specification is 160 pounds. The rod bearings torque specification is 120 pounds.
AnswerNormally you blow a head gasket, when the engine overheats. They can also blow from incorrect installation or poor design.Head gaskets expand and contract according to engine temperature, these cycles may, after a long period of time, cause the gasket to fail. If you're replacing the gasket, check the engine block, and head for warping. Follow proper cleaning and torque specifications during assembly.